Identificador: 967
Abierta
ID de articulo : # 967 se ha agregado a su lista de deseos.
PARTE: 12131 – LIJADORA BANDA ANCHA – SUPERIOR E INFERIOR – 52” ANCHO - TIMESAVERS
AMXmachinery
Descripción
PARTE: 12131 – LIJADORA BANDA ANCHA – SUPERIOR E INFERIOR – 52” ANCHO - TIMESAVERS
USADA – EN BUENAS CONDICIONES
3 lijas superiores y 3 lijas inferiores
Constant passline (38” height).
This unit is ideal for sanding heavy panels
Bottom Head first:
1st Head 60 HP 80/70 durometer Contact Drum,
2nd head 50 HP 80/70 durometer contact drum,
3rd head 40 HP Platen
96” long Conveyor between machines driven by the top head machine
Top Head
1st Head 60 HP 80/70 durometer Contact Drum,
2nd head 50 HP 80/70 durometer contact drum,
3rd head 40 HP Platen
7-1/2 HP feed belt drives
Motors are TEFC 230/460 volt motors, piping to main line, spare contact rolls, sand paper, and hydraulic power unit.
Appears in excellent condition. Machine was running when it was removed from service and has been in dry storage.
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
LIJADORA DE CANTOS - DOBLE - 2 MOTORES 1 HP C/U
PARTE: 2AM-220 - LIJADORA DE CANTOS - DOBLE - 2 MOTORES 1
HP C/UMotors: (2) 1 HP 6 pole 3ph Models & Voltage: 221: 120 or 208-240v / 1ph / 50-60hz222: 208-240v / 1 or 3ph / 50-60hz224: 400-480v / 3ph / 50-60hz Variable Speed: AC Inverter 100-1200 rpm Arbor: 1" Dia. by 6" Tall Vertical Travel: 6" Table Travel: 2" Table Height: 36 inches Table Size: 60" x 24" Air Pressure Required: 80 psi minimum Dust Collection: 3" round, 250 cfm The Model 220 P...
AMXmachinery
PARTE: 12459 - TALADRO MULTIPLE - INSERTADORA PERNOS - ARTECH
PARTE: 12459 - TALADRO MULTIPLE -
INSERTADORA PERNOS - ARTECH
USADA - BUENAS CONDICIONES
AMXmachinery
ROUTER PIN INVERTIDO - CR ONSRUD 3025
PARTE: 12126 - ROUTER PIN INVERTIDO - CR ONSRUD 3025
USADO – EN BUENAS
CONDICIONES – LIMPIADO Y REVISADO
230V, 3 PH, 60 CY
5 HP motor, belt driven to spindle
20,000 RPM spindle speed
Pneumatic spindle and guide pin movement via foot
pedal
3" spindle travel
24" x 36" acrylic topped table
30" throat depth
Three position adjustable depth stop
1/2" max. chucking capacity
"Fog Mist" lubricated spindle system
Automatic pre-lubrication of spindle bearings (each...
AMXmachinery
PROFILE KNIFE GRINDER - RONDAMAT 960
PARTE: 12306-E - PROFILE KNIFE GRINDER - RONDAMAT 960USED - GOOD CONDITION9-3/8″ max. arbor lengthTool dia. 11-3/4″ max. to 4″ minGrinding wheel speed inverter controlledGrinding wheel speeds from 1,500 to 3,000 RPM 1.5 HP motorhydro-clamping of grinding wheel to arborSetting gauges for axial constantAxial clearance angle 0-20 degreeOn board diamond wheel dressing8-7/8″ max. 6″ min. grinding wheel dia
13-gal. coolant tank w/ 1.2 HP pump