Identificador: 964
Abierta
ID de articulo : # 964 se ha agregado a su lista de deseos.
Descripción
PARTE: 12128 - ENGOMADORA 2 LADOS – BLACK BROS – ANCHO 68”
USADA – MUY BUENAS CONDICIONES - REACONDICIONADA
Width Capacity: 68"
Grooved, Rubber-Covered Applicator Rolls
Applicator Roll Diameters: 7.75"
Main Motor: 1.5 HP, 208-230/460v, 3ph
Hard Rubber-Covered Doctor Rolls
Top-Elevator Style (Constant Pass-Line) w/ Manual Hand-Crank for Thickness Adjustment
Mechanical Digital Readout for Thickness
Currently 460v, 3ph (Ask about Voltage Change)
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
-500x500.jpg)
AMXmachinery
PLANTA DE TRIPLAY - 1
PLANTA DE TRIPLAY - 1PARTE: 11750PARTE: 11751 - PRENSA CALIENTE DE VAPOR CON 9 PLATOS1 - PRENSA CALIENTE DE VAPOR CON 9 PLATOS Y 8
ABERTURAS MARCA IND. G.H. CON DIMENSIONES DE 60” POR 108” ACCIONADA POR UNIDAD
HIDRAULICA, EQUIPADA CON MESA DE ALIMENTACION, MOTORES DE 2 A 7.5 HP ASI COMO
15, 30 Y 40 HP CON RELOJ DIGITAL PARA EL TIEMPO DE PRENSADO CON UN RANGO DE 1 A
30 MINUTOS, CON BOMBAS HIDRAULICAS EN EL INTERIOR DE DIFERENTES CAPACIDADES DE
5 A 20 HP.PARTE: 11752 - ENGOMADORA DE 40”...
AMXmachinery
PART: 12633 – TEMPLATE MAKER - ISEL-AUTOMATION
PART: 12633 – TEMPLATE MAKER -
ISEL-AUTOMATION
Used - Mechanically the machine is like new -
Sold as is
It is complete and worked well
until we stopped using it many years ago.
Don't have the software for it so
we can’t currently run it.
As I mentioned, it is a project,
and you would need to track down software and a computer to connect to.
Mechanically the machine is like
new.
AMXmachinery
PARTE: 3MA-ULTRAWII - CEPILLO 2 CARAS - 250 MM ANCHO - 3 HP - MARUNAKA
PARTE:
3MA-ULTRAWII - CEPILLO 2 CARAS - 250 MM ANCHO - 3 HP - MARUNAKA
NUEVO CON GARANTIAOne way feeding onlyWork width: 250 mm (25 degrees), 55 mm (60 degrees)Work Height: 180 mm
Knife bias angle: 0 - 60 degrees variableFeed speed: 88 m/min (60hz), 73 m/min (50hz)Feed motor : 2.2Kw x 2 motors
Head up/down motor: 0.2 Kw2 knife stocks on top and bottom surfacesKnife type: Changing blade typeKnife size: 335 length x 66 x 8 mmAccessories: Changing blades and standard toolsMachine size: (WxLxH...
AMXmachinery
POSTFORMADORA
PARTE # 2EV-0138 - POSTFORMADORA - 8 PIES LARGO 1 LADO - EVANS 0138 All Form 8' capacity- 220 Volt, 1 Ph., 60 Hz, 20 amp. Or 380 Volt, 3 Ph. 50 Hz- 100 PSI air required 1 CFM (2 CFM if using vacuum clamp)- Standard Features: - Overhead clamp and vacuum system- Forming length capacity 100"- 1 ½” maximum forming radius. (3” thick material)- Foot print 4' wide X 11' long- Thermostatically controlled heater, ambient to 500 degrees Fahrenheit- Integrated timer. I...