Identificador: 923
Abierta
ID de articulo : # 923 se ha agregado a su lista de deseos.
Descripción
PARTE: 12029 - PINCH ROLLER - EVANS 0206
USADA
EN BUENAS CONDICIONES DE OPERACION
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
BRIQUETEADORA PARA METAL - HORIZONTAL - HYDRAULICA - 30 HP
PARTE: 12377 - BRIQUETEADORA PARA
METAL - HORIZONTAL - HYDRAULICA - 30 HP
USADA - BUENAS CONDICIONES30
HP Motor10lb
Average Bale (Aluminum)30lb
Average Bale (Steel Chips)38lb
Average Bale (Copper)36
Second Cycle Time (100/hr) -Excl. – HopperVickers
Hydraulic Pump8”
Bore (Main Cylinder)9”
Bore (2nd Compression)4”
Bore (Cover)Approximate
Dimensions: 105” W x 60” H x 186” L (Machine Only)
Approximate Weight: 18,000 lbs.
AMXmachinery
PARTE: 12599 - UNIDORA SABANAS CHAPA - FISHER+RUCKLE FZX-28 DELTA
PARTE: 12599 - UNIDORA SABANAS CHAPA - FISHER+RUCKLE FZX-28 DELTAUSADA – BUENAS CONDICONESFISHER+RUCKLE FZX-28 DeltaVeneer crossfeed splicing machine with pre-glued veneer sheetsVeneer strip length (in fiber direction) 750 - 2800 mm Veneer strip width (cross to fiber direction) 70 - 600 mmVeneer strip thickness (depending on veneer) 0.3 - 1.5 mmEC standardsYear 2001400V/50HzComplete of:- INTERMEDIATE CONVEYORThe intermediate conveyor serves at the same time as buffer to avoid dead times durin...
AMXmachinery
CNC TALADRO, ENGOMA, INSERTA – PILLAR
PARTE: 12380 - CNC TALADRO, ENGOMA,
INSERTA – PILLAR
USADA – MUY BUENAS CONDICIONESClamps
working, software, stops and such in operating condition. This
machine has Windows 7 installed and the electrical cabinet is cleaned out in
addition. The
dowel inserter has been serviced and works correctly.Been
completely gone thru and serviced, with manuals. Machine is 100%2016
model year PILLAR
H-49Machine
Has Been Fully ServicedNew
Injector Service Kit Installed49"
work field2
Z...
AMXmachinery
REASERRADORA - 1 BANDA - BANDA 12” ANCHO
PARTE:
12374 - REASERRADORA - 1 BANDA - BANDA 12” ANCHO - GRIZZLY
Usadas - Buenas condiciones
Motor 20 HP, 220/440V, 3 fases
Unidad hidráulica 2 HP
Volantes 28”
Zapata de 1”