Identificador: 91
Abierta
ID de articulo : # 91 se ha agregado a su lista de deseos.
Descripción
PARTE # 2EV-6600 - CORE BUILDER - EVANS 6600
Maquina para hacer el centro o la base de las cubiertas de cocina
The Evans machinery model 6600 core builder produces a quality core every time. Within one pass, this machine bonds the build up to both sides of the panel using hot melt adhesive applies T-Mold for no drip edges and shapes your core to the required profile. The model 6600 Core Builder operates at a feed rate of 20 FPM as it travels on a non-skid straight line feed system. The model 6600 Core Builder is a smart investment by helping you and your company save time and money.
MACHINE SPECIFICATIONS:
Machine Length | 158" |
Machine Width | 89" |
Machine Height | 72" |
Working Height | 36" |
Electrical | 220v 60 Hz 3 Ph |
Air Supply | 100 PSI |
Edge Shaper | 5 HP 5850 RPM 1.25 Spindle Diameter |
Hot Melt Unit | 20 lbs Capacity 1500 Watt Heater |
Feed Rate | 20 FPM |
Center Feed Drive | Non-Skid Pad |
Board Width | 16" Min. to 48" Max |
Board Thickness | 2" Maximum |
Build Up Width | 3/4" Min. to 1-1/2" Max. |
Build Up Thickness | 1-1/2" Maximum |
T-Mold Slotter | 1-1/2 HP 3600 RPM .875" Spindle diameter 8" Blade |
Groover | 1-1/2 HP 3600 RPM .875" Spindle diameter 8" Blade |
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
LIJADORA DE TAMBOR
PARTE # 2SM-913003 - LIJADORA DE 2 TAMBORES - 25” DE ANCHOSanding Capacity:Maximum Width (in): 25Minimum Length (in): 2-1/4, varies per applicationMaximum Thickness (in): 6Minimum Thickness (in): 1/32Dimensions HxWxD (in): 52 x 42 x 27Drum: 5 x 25 extruded aluminumDrum Speed: 1740 RPMDust Hood: Steel hood w/ two 4" vacuum ports, hinged at back, 1000 CFM recommendedBall bearings (1"): 4, sealed and permanently lubricatedConveyor Motor: 43 in.-lb. torque, direct drive D.C. motor, infinitely vari...
AMXmachinery
PARTE: AMX-10072 - SIERRA ESCUADRADORA VERTICAL - HOLZ-HER 1265 SUPER CUT
PARTE:
AMX-10072 – SIERRA ESCUADRADORA VERTICAL – HOLZHER 1265 SUPER CUTUSADA – MUY BUENAS CONDICIONESMOTOR: 4 HP (3KW) 220V, 3 FASES, 60 HZNAVAJA INCISORAPROFUNDIDAD DE CORTE: 2 PULGADASDIAMETRO DE DISCO CORTADOR: 8-1/4 PULGADAS, 1-3/16” FLECHAMEDIDAS MESA: LARGO 510 CM X ALTO 225 CM X ANCHO 90 CM – PESO: 850
KG APROX.MEDIDAS ENVIO: LARGO 514 CM X ALTO 235 CM X ANCHO 150 CM – PESO:
1,000 KG APROX.EN TARIMA LISTA PARA ENVIO
MANUAL...
AMXmachinery
ASTILLADOR SCHUTTE
PARTE # 11802 - ASTILLADOR - SCHUTTE 1360IN GOOD CONDITIONS, AS-ISTop infeed is 21-1/2" x 23".Currently has 1" thick swinging hammers. Screen included (not installed) has 1/2" dia. round holes. Has been modified to a pneumatic discharge.Includes sub base, motor pedestal and permanent magnet installed in infeed chute.
AMXmachinery
PANEL CLEANER
PARTE # 2EV-4700 - PANEL CLEANER – EVANS 4700Powered In-Feed and Out-FeedFour 4" Dust PortsTwo 10” Nylon BrushesMaterial Thickness IndicatorEmergency Stop Buttons & Safety GateBase Work Height: 30”Brush Motor: 1 ½ HPDrive Motor: ½ HPElectrical: 230/460 V, 3 PH, 60 Hz 220 Volt 3 PhaseOptions:- Riser Base