Identificador: 86
Abierta
ID de articulo : # 86 se ha agregado a su lista de deseos.
Descripción
PARTE # 2EV-4700 - PANEL CLEANER – EVANS 4700
Powered In-Feed and Out-Feed
Four 4" Dust Ports
Two 10” Nylon Brushes
Material Thickness Indicator
Emergency Stop Buttons & Safety Gate
Base Work Height: 30”
Brush Motor: 1 ½ HP
Drive Motor: ½ HP
Electrical: 230/460 V, 3 PH, 60 Hz 220 Volt 3 Phase
Options:
- Riser Base
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
POSTFORMADORA - 12 PIES LARGO 1 LADO - EVANS 0110
PARTE: 2EV-0110 - POSTFORMADORA - 12 PIES LARGO 1 LADO - EVANS 0110Maximum Post Forming Length : 12’Overhead Radiant Heater and DeflectorsPush Button Pneumatic ControlsSteel frame with adjustable leveling feet.35" working height. Dimensions 175” long, 26” wide, 60” highAdjustable Leaf Spacing Between ½” and 1 ½”Electrical: 240 V, 1 PH, 60 HzAir Requirement: 100 PSICrated weight 1500 LBS. Shipping dimensions 182” long X 30” wide X 64” highOptions: ¼” cove rod system (requi...
AMXmachinery
PARTE: 1AM-0010-1 - DESARMADORA DE TARIMAS - USO RUDO - INDUSTRIAL
PARTE:
1AM-0010-1 - DESARMADORA DE TARIMAS - USO RUDO - INDUSTRIALNueva con garantía – 6 meses sobre defectos de fabricación
en partes mecánicasMotor 10 HP, 220/440V, 3 fases, conectado a 220VOpcional Motor mas chico 5 HP, 220/440V, 3 fases, conectado a 220VEstación de paro y arranque con termomagneticoSierra cinta 228” largo x 1” ancho
- de importación de la mejor calidadMedida mesa: 60” ancho x 48”
fondo
Medida máxima de tarima: 60”
ancho x c...
AMXmachinery
EXTRACTOR DE ASERRIN - 75 HP - DONALDSON
PARTE: 12315 - EXTRACTOR DE
ASERRIN - 75 HP - DONALDSON
USADO - MUY BUENAS CONDICIONES
22,000 CFM @ 7:1 Air-To-Cloth
Ratio
3,029 Sq. Ft. of Media from
(189) Bag
Pulse Jet Filter Cleaning from
Shop Air
(2) AMM Modules
Clean Air Plenum with Top-Bag
Removal
Service Railing with Kickplate
Trough Hopper, Screw Auger To
Rotary Airlock Discharge
75 HP Blower Complete with
Starter and Cleaning Controls
AMXmachinery
TRISCADORA 10-45 MM
PART # 4VF-SV45MN - TRISCADORA PARA SIERRA CINTAS 10 -45 MMNueva con garantiaPossibility to choose the setting: left/right or left/right/straight. Adjustment of the feed pitch, of the setting height and of the tooth bending degree; self centring clamps. Workbench model.Bandsaw Thickness [min-max]: 0,5 – 1,00 mmBandsaw Width [min-max]: 10 – 45 mmSetting Pitch [min-max]: 5 – 25 mmTwo types of setting: Net – Gross Weight: 3,8 – 4,5 kgMachine Dimensions [D x W x H]: 35 x...