Identificador: 810
Abierta
ID de articulo : # 810 se ha agregado a su lista de deseos.
Descripción
PARTE # 11913 - PRENSA DE TABLEROS – 20 SECCIONES – TAYLOR
8.5 ft. wide with approximately 6 clamps per section
Clamps are standard 2-1/2” high jaws by 32” opening
Includes air tightener and panel flattener
Machine was new in 1983
Good conditions
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 2PG-F-130 – HORNO PARA CERAMICA, VIDRIO, METALES – 25 LITROS
PARTE: 2PG-F-130 – HORNO PARA CERAMICA, VIDRIO, METALES – 25 LITROS
Nuevo con garantía
Temperatura Máxima: 926 grados centígrados
2400 watts, 20 Amps
Medidas interiores: 279 mm ancho x 279 mm fondo x 330 mm
alto You can make figurines up to 12” tall in the
F-130. Anneal large glass beads and marbles. Raise the spring-loaded
vertical-drop door to insert a glass figurine with a punty rod. Lower the door.
The punty rod will extend outside the firing chamber through the s...
AMXmachinery
SIERRA MULTIPLE - DE VAIVEN - NEVA
PARTE:
12411 - SIERRA MULTIPLE - DE VAIVEN - NEVA
USADA - BUENAS CONDICIONES
AMXmachinery
TALADRO MULTIPLE - 23 TALADROS – VERTICAL – CON PEDAL
PARTE # RT-R19F3 – TALADRO MULTIPLE - 23 TALADROS – VERTICAL – CON PEDAL
Nueva con garantía
23-Spindle
Drill Head
Gear
Driven Spindles on 32mm Centers
Index
Pins
3
HP Spindle Drive Motor, TEFC
10mm
Bored Collets
(12)
Right Hand, (11) Left Hand
12″
Throat Depth
60″
Back Fence With (4) Stops
24″
X 48″ Work Table Surface
(2)
Spring Operated Hold Downs
Wired
3-Phase 240/480 Volt, 60 Hz.
Pneumatic
Driven Boring Cycle
Tooling
Not In...
AMXmachinery
SIERRA CINTA INDUSTRIAL - USO RUDO - MOTOR 15 HP
PARTE: 1N-SCA-15 - SIERRA CINTA - VOLANTE 39.5” (100 CM) - MOTOR 15 HPNuevo con garantíaMismo tamaño
de sierra cinta que los aserraderosVolante de 100
cm diámetro, para sierra cinta de 4” de anchoOpcional: motor
de 20 HP y 25 HP
Uso Rudo, Industrial y ContinuoVideo: https://vimeo.com/584002334
CARACTERISTICAS
1N-SCA-15
DIAM. VOLANTE
40” - 100 CM
PARA CINTA
4”
MOTOR
...