Identificador: 785
Abierta
ID de articulo : # 785 se ha agregado a su lista de deseos.
Descripción
PARTE # 11780 - LIJADORA DE DISCOS Y CEPILLOS - SLIPCON
EN MUY BUENAS CONDICIONES
MODELO: DBB-1350
Specifications
· Working width: 1350mm
· Maximum thickness of work-piece: 100mm
· Minimum thickness of work-piece: 1mm
· Motor disc-station: 1.5 kW with 50-300rpm
· Oscillation: 0.37 kW, 10-40rpm, 100mm
· Motor (each sanding roller): 2.2 kW, 14-300rpm (400mm)
· Diameter sanding roller: 300/400mm
· Speed of feed belt: 3-15 m/min
· 230v, 60Hz 3ph
Standard Features
· Automatic, pneumatically-controlled centering of feed belt
· Motorized height adjustment of sanding unit (constant height of through-feed)
· Easy pull-out of disc-station on left and right for speedy changing of sanding strips
· Separate height adjustment of disc-station from sanding rollers
· Motorized height adjustment of disc-station
· Electronic digital display of work-piece height
· Blowing device for cleaning work-piece
· Antistatic device
Extras
· Vacuum bed/device for holding down smaller work-pieces
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
COMPRESOR PISTON - MOTOR 10 HP
PARTE: 1SL-DC-10H500 – COMPRESOR DE PISTON HORIZONTAL – MOTOR 10 HP – 500 LTSNUEVO CON GARANTIACompresor de 10 HP Horizontal Tanque: 500 Litros Cabezal Marca FIAC Con guarda bandas Base en fierro colado, Cabezal en Aluminio y Cilindro en fierro colado DESPLAZAMIENTO: 40 CFM, 32 ACFM EFICIENCIA VOLUMETRICA 80% PRESIÓN MÁXIMA: 175 PSIG, 12 BAR Tiempo de llenado 4' 14" 1280 RPM Nivel sonoro 80 MOTOR 10HP, 7.5 KW, 120V, 3PH, 60HZ Conexión de descar...
AMXmachinery
SIERRA RADIAL 4.5 HP
PARTE # SIL-DC-SBR14-45 - SIERRA RADIAL - MOTOR 4.5 HPNueva con garantiaMotor 4.5 HP, 220V, 60Hz, 3 fasesMedidas de la mesa 34-1/2” x 43-1/4”Diámetro del disco 14”Diámetro del eje 1”Máxima capacidad de corte transversal 24-3/8”Máximo espesor de corte 4-1/8”Movimiento angular del brazo 45 - 0 - 45 gradosMovimiento angular del motor 0 – 22 – 45 – 90 gradosGiro del motor 0 – 180 gradosPeso de la maquina 200 kilosTipo de empaque 1 caja
AMXmachinery
DOBRADORA DE TUBO HIDRAULICA
PARTE # 2MA-HTB-2 - DOBRADORA DE TUBO HIDRAULICANueva con garantia- Bends up to 2"schedule 40 pipe (1.54")- Dies available in 120 and 240 degrees- Dies and all Pins are heat treated- Bronze bushings at Pivot Points- Capabilities greater than benders costing 3 times as much- High quality components and cosntructionTube Dies: 3/4", 7/8", 1", 1-1/8", 1-1/4", 1-1/2", 1-3/4", 1-5/8", 2" for 120 degrees for radius 120 and 240 degreesPipe Dies: 3/4", 1", 1-1/4", 1-1/2" for Radius 120 and 240 degreesWei...
AMXmachinery
PARTE: 2CA-SM-65MO – MOLDURADORA – 1 LADO SUPERIOR – 6” ANCHO
PARTE: 2CA-SM-65MO – MOLDURADORA – 1 LADO SUPERIOR – 6” ANCHONuevo con garantíaFeatures:Powered pneumatic upper & lower pressure rollers for through feeding and precise cutting.Precision ground cast iron table for durability.Rigidly mounted alloy steel spindle provides accurate vibration-free power transfer.Heavy-duty sheet metal frame.Heavy-duty alloy spindle for durability & run out free performance.Spindle height adjustment by precision rack & pinion gears.Magnetic overload switch fo...