Identificador: 78
Abierta
ID de articulo : # 78 se ha agregado a su lista de deseos.
Descripción
PARTE: 2EV-4253 - INDEX TABLE - EVANS 4253
Semi-automatica para laminacion de tableros PVA, alimentacion izq a der.
Semi-automatic Index Table for PVA Panel Laminating
Standard Features:
- Left to Right Feed
- Automatic Board Drop
- Adjustable Board Guides
- Hand Crank Width Adjustment
- Pneumatic Break to Lock Width
- Custom Designed Conveyor Rollers
- Max. Board Size: 62" W X 145" L
- Min. Substrate Size: 9" W X 27" L
- Max Board Thickness: 1.5"
- Min Board Thickness: .375
- In Feed Height: 43"
- Out Feed Height: 40"
- Footprint: 177" L x 87" W
- Electrical: N/A
- Air: 100 PSI
- Shipping Dimensions: 179" L X 90" W X 55" H
- Crated Weight: 2500 LBS
Options:
- Other than standard work height
- Right to Left hand feed
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
LIJADORA DE MOLDURAS
PARTE # 2TA-SD-904MU – LIJADORA DE MOLDURAS – 4 CABEZALESNueva con garantíaVariable feeding 20" to 80" to get different setup easily.Every sanding head can use profile disc, brush wheel or sand belt with sponge drum for fine, detail finish.Max. sanding thickness 4".Min. sanding length 13".Sanding spindle 1-1/4" dia. 2 HP.Max sanding wheel 12" dia.SPECIFICATIONS Wheel, Belt Head Brush Wheel Drive Motor2 HPBrush Tilts 90° ~ 180°Sanding Belt3" x 20"Sanding Wheel Dia. Max8"Sanding Spindle D...
AMXmachinery
PARTE: 2TA-PL-18 - CEPILLO 2 CARAS 18", 24" Y 38"
PARTE: 2TA-PL-18 - CEPILLO 2 CARAS - 18" ANCHOPARTE: 2TA-PL-24 - CEPILLO 2 CARAS - 24" ANCHOPARTE: 2TA-PL-38 - CEPILLO 2 CARAS - 38" ANCHOOPCIONES:CABEZAL CON CUCHILLAS EN ESPIRALCT-SCH-14T 14MM x 14MM - NAVAJAS PARA CABEZAL EN ESPIRAL CT-SCH-15T 15MM x 15MM - NAVAJAS PARA CABEZAL EN ESPIRALFEATURES:- Upper & lower Straight Cutterheads for accurate and powerful two sided planning in one pass.- Optional Auto digital thickness control for quickly and accrue set up.- The work table surface was pre...
AMXmachinery
DESCORTEZADOR 27"
PARTE # 2SE-DR5-27 - DESCORTEZADORA - 27" CAPACIDADMaximum Log Diameter Barked 25”Minimum Log Length 9’Number of Debarking Tools 5Width of Debarking Tools 4”Maximum Ring Speed 133 rpmMinimum Horsepower to Operate Ring 60Maximum Log Feed Speed 221 fpmLog Feed with 15% Tool Overlap 188 fpmHydraulic Pumping Unit 10 hpAir Pressure Required 90 -100 psiMachine Weight 35,000 pounds
AMXmachinery
PARTE: AMX-10160 - EXTRACTOR DE TUBO - DIAMETRO INTERNO 19-1/2” - MOTOR 3/4 HP
PARTE: AMX-10160 - EXTRACTOR DE TUBO - DIAMETRO
INTERNO 19-1/2” - MOTOR 3/4 HP
USADO - MUY BUENAS CONDICIONES -
TODOS LOS BALEROS NUEVOS
MOTOR 3/4 HP, 220/440V, 3 FASES, 60
HZ, 1500 RPM
DIAMETRO INTERNO: 19-1/2”
DIAMETRO EXTERNO: 22”
MEDIDAS TOTALES: 31” LARGO X 22” ANCHO
X 12” ALTO
CAUDAL: 8,712 M3/HR
HECHO EN MEXICO