Identificador: 617
Abierta
ID de articulo : # 2579 se ha agregado a su lista de deseos.
ID de articulo : # 569 se ha agregado a su lista de deseos.
ID de articulo : # 559 se ha agregado a su lista de deseos.
.jpg)
Descripción
PARTE: 2SW-LS4-36 - MESA DE TIJERA - PLATAFORMA 36" X 72"
Nuevas con garantía
Hechas en USA
Medidas y capacidad para manejar 1 bulto de MDF, Aglomerado, etc. a la vez para alimentar maquinaria para la madera,
CAPACITY: 4,000 lb. uniform load.
PLATFORM: 36" x 72" smooth plate with 4" Fork Risers.
BASE FRAME: 24" x 48" with lag plates and maintenance device.
LOWERED HEIGHT: 6-3/4"
VERTICAL TRAVEL: 36"
RAISED HEIGHT: 42-3/4"
ELEVATING TIME: 44 seconds (approx.)
LOWERING TIME: Adjustable with pressure compensated flow control.
POWER UNIT: Internally mounted with 1.0 HP TENV electric motor (includes a power cord, approx. 9' in length ) and .85 GPM hydraulic pump, valving, and reservoir filled with oil.
PRIMARY VOLTAGE: 115/1/60
CONTROL VOLTAGE: 115/1/60
CONTROL NEMA: 1 footswitch with safety cover. Includes 10 ft of straight cord.
ACTUATION: Two 3-1/2" low pressure cylinders with chrome plated rod, power up/gravity down.
BUSHINGS: All pivot points equipped with Teflon lined bushings. Leg rollers have Southworth exclusive wear indicators.
FINISH: Dark green self-priming machinery enamel with platform painted beige.
WARRANTY: Parts will be covered for two years upon receipt and approval of application information (see Southworth warranty for details).
WEIGHT: 900 lb. (approx.) - Freight class #70
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
CALDERA DE GAS - 100 HP
PARTE: 11759 - CALDERA DE GAS - 100 HP
8 - CALDERA DE GAS. 100 HP
PRODUCE VAPOR PARA LA PRENSA DE 8 PLATOS QUE REALIZA EL ARMADO DE TRIPLAY, CON
MOTOR DE 15 HP Y TIRO DE 5MTS. COMBUSTIBLE GAS LP.
AMXmachinery
AFILADORA DE CUCHILLAS PARA MOLDURADORA
PARTE: 2TA-TG-9330 - AFILADORA
DE CUCHILLAS PARA MOLDURADORA
NUEVA CON GARANTIAFEATURES:
Economical model for small shop.
Work table back to front, left to right is moved on linear
bearing cross roller rail sets, accuracy and durability.
Grinding wheel head is micro adjustable and accurate. 2 HP
variable speed control motor for powerful grinding.
Easy setup template holder for accurate copy tracer.
Knife-edge angle is adjusted by dovetails are grooved;
grindin...
AMXmachinery
PARTE: 2GB-160 - CORTADORES - FINGER JOINT - ESTILO JAPONES - 2 ALAS
PARTE: 2GB-160 - CORTADORES - FINGER JOINT - ESTILO JAPONES - 2 ALASPARA TROMPO O ESPIGADORADIAMETROTOTALESPESORFLECHALONGITUDJOINTPARTE #160mm4.0mm70mm12mm2GB-160X4X0.6X70-2T160mm4.0mm50mm12mm2GB-160X4X0.6X50-2T160mm9.0mm50mm12mm2GB-160X9X50-2T160mm10.0mm50mm12mm2GB-160X10X50-2T
AMXmachinery
BRIQUETEADORAS DE METAL - HYDRAULICAS
BRIQUETEADORAS DE METAL - HYDRAULICAS
NUEVAS CON GARANTIALas briqueteadoras de metal pueden compactar diferentes clases de materiales como
hierro fundido, aluminio, cobre, magnesio, titanio, molibdeno, metal, etc., en
bloques de alta densidad sin aditivos.Para mas información llámenos,Especificaciones:
Modelo
unidad
3CH-83A-160
3CH-Y83-160
3CH-Y83-230
3CH-Y83-300
3CH-Y83A-300
3CH-Y83-800...