Identificador: 59
Abierta
ID de articulo : # 59 se ha agregado a su lista de deseos.
Descripción
PARTE # 2TA-BP-100 - BRIQUETEADORA MOTOR 7.5 HP
- Use wood chips, saw dust and various biomass/ag residues to make the briquettes.
- Cost saving management of waste material by reducing the volume of waste to be handled.
- Effectively helps with compliance of local regulations mandating reduction of solid waste.
- Converts waste into a valuable heating source for colder climates
- Increases profitability by converting waste into a marketable product.
- Design allows for incorporation of multiple units in parallel for unlimited capacity.
| Specifications | BP-100 |
|---|---|
| Installed Power | 7.5 HP |
| Ferrule Dimensions | Ø1000 H 36.22" (920mm) |
| Max. Volume of Saw Dust in a Ferrule | 0.8m³ |
| Briquette Diam | 2" (50 mm) |
| Power | 7.5 HP |
| Pump | 26cm³ 1000g group 2 |
| Max. Working Pressure | 15MPa |
| Dimensions | 66" x 43" x 59" (1680 x 1100 x 1500 mm) |
| N. W. | 1499 LBS (680 kg) |
| G. W. | 1874 LBS (850 kg) |
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
SIERRA CINT CNC VENETA SHUTTLE
PARTE # 10177 - SIERRA CINTA CNC - VENETA SHUTTLEEN MUY BUENAS CONDICIONES DE OPERACIONMARCA: VENETAMODELO: SHUTTLEMANUFACTURA: 200415 KW, 400V, 50-60 HZVERTICAL WORKING STROKE X : 3500MMVERTICAL WORKING STROKE Y : 800MMSTANDARD CUTTING LENGTH: 1500MMCUTTING HEIGHT: 0-150MMCUTTING ANGLE: /- 90 DEGREEDIMENSIONES TOTALES: 4600MM X 3500MM X 2500MMVIDEO DISPONIBLE DE LA MAQUINA TRABAJANDO
AMXmachinery
PARTE: 12578 – CHAFLANADORA - HAZELDINE
PARTE: 12578 – CHAFLANADORA - HAZELDINEUSADA – BUENAS CONDICIONES
AMXmachinery
SIERRA DE MESA - DISCO 10” - MOTOR 3 HP
PARTE: 12345-1 - SIERRA DE MESA - DISCO 10” - MOTOR 3 HP
- RIDGID
USADA - BUENAS CONDICIONES
AMXmachinery
ESPIGADORA 1 LADO - FINGER JOINT
PARTE: 2TA-SET-60 - ESPIGADORA 1 LADO - FINGER
JOINTFeatures:It performs cut off, burrs trimming, and moulding
functions.Two 4" D x 5" L max. tenon cutters, cope spindle
accepts general shaper cutter. Suited for cutting tenons, finger joints for
window or doorframe and general joint-tenon.Hand, manual operated clamping and feeding of stock.First the trim saw to cut off the end of stock evenly.Then two moulding, tenon spindles are mounted at the rear
of saw enable machine performs edge moul...