Identificador: 573
Abierta
ID de articulo : # 573 se ha agregado a su lista de deseos.
Descripción
MOTORES ELECTRICOS PARA MAQUINARIA
PARTE # | CAPACIDAD | VOLTAJE | RPM | MARCA |
1ME-1005 | 5 HP | 220V, 3 PH, 60 HZ | 1,700 | WEG |
1ME-10075 | 7.5 HP | 220V, 3 PH, 60 HZ | 1,700 | WEG |
1ME-1010 | 10 HP | 220V, 3 PH, 60 HZ | 1,700 | WEG |
1ME-1015 | 15 HP | 220V, 3 PH, 60 HZ | 1,700 | WEG |
1ME-1016 | 20 HP | 220V, 3 PH, 60 HZ | 1,700 | WEG |
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
RESACADORA DOBLE – 48” CAPACIDAD LARGO
PARTE: 2FA-2NX-48 – RESACADORA DOBLE
– 48” CAPACIDAD LARGO
NUEVA CON GARANTIA
HASTA 4,000 RESAQUES/HRStandard FeaturesAdjustable
Notch up to 3"Variable
SpeedAlmost Unlimited Capacity Machine
SpecsDimensionsLength:
Model Dimensions 24"Width:
73"Height:
56"Infeed
Height: 40" PowerCutter
Head Motors: 20HP 208/230/480/3/60 TEFCInfeed
Motor:1-1/2 HP 208/230/480/3/60 TEFCVFD:
For lnfeed Motor Variable SpeedCompletely
Pre-Wired Motor Starter with Start/Stop Buttons and Circu...
AMXmachinery
PART: 1FJ-010-E - PALLER NOTCHER - DOUBLE - 2 MOTORS 15 HP - 9” LENGTH
PART:
1FJ-010-E - PALLER NOTCHER - DOUBLE - 2 MOTORS 15 HP - 9” LENGTH
New with warranty – 6-month warranty on manufacturing defects on
mechanical parts onlyEach notch 9" lenght standard
Production rate: 1 part every 3 seconds = 1,200 parts/hr. approximate
2 main motors: 15 HP, 220/440V each – used motor, checked and tested
Feed motor: 5 HP,220/440V – used motor, checked and tested
Machine dimensions: 96” length x 84” width x 48-1/2” height - Weight: 2,400
lb.
AMXmachinery
SIERRA CINTA – VOLANTES 40” – 15 HP - CON ALIMENTADOR – PEHAKA
PARTE: 12226 – SIERRA CINTA – VOLANTES 40” – 15 HP - CON
ALIMENTADOR – PEHAKA
USADA – MUY BUENAS CONDICIONES
saw wheel
diameter 1050 mm
cutting height
max. 450 mm
hydraulic tilt table
45°
infeed roll
driven by motor
infeed speed
2,5/5/7,5/15 m/min.
motor power 11 Kw
(15 HP)
table size 1100
mm x 1050 mm
cutting width
(distance between saw stand and sawblade) 1020 mm
diameter of the
connection for a dust suction pipe
overall size: L
22...
AMXmachinery
SHAPER WITH FEEDER - MOTOR 7.5 HP - LARICK 390
PART:
12327-E - SHAPER WITH FEEDER - MOTOR 7.5 HP - LARICK 390
USED
- EXCELLENT CONDITIONS
230/460V,
3 PHASE