Identificador: 474
Abierta
ID de articulo : # 474 se ha agregado a su lista de deseos.
.jpg)
Descripción
PARTE: 1SL-DC-SP20-M - PRENSA HIDRAULICA - 20 TON CON MANOMETRO
NUEVA CON GARANTIA
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: AMX-10164 - EXTRACTOR DE PARED - EN ALUMINIO - 19” ANCHO X 19” ALTO X 16” FONDO
PARTE: AMX-10164 - EXTRACTOR DE PARED - EN ALUMINIO -
19” ANCHO X 19” ALTO X 16” FONDO
USADO - MUY BUENAS CONDICIONES
MARCA: FLOAIRE
MODELO: DR12H
MEDIDAS: 19” ANCHO X 19” ALTO X 16”
FONDO
MOTOR: 0.18 HP, 115V, 1 FASE, 60 HZ
FLA: 2.0Video: https://vimeo.com/870538960
AMXmachinery
SANDER QUICKWOOD ELITE PRO1100
PART: 12052-E – SANDER QUICKWOOD ELITE PRO1100Machine has been cleaned & checked.240 Volt 3-PhaseComplete with dust hose & manifoldQUICKWOOD ELITE PRO 1100* MAX WIDTH OF WORKPIECE...43"* MAX HEIGHT OF WORKPIECE...3.9"* MAX LENGTH OF WORKPIECE...INFINITE* LINEAR SPEED OF BELT...2-12 M/MIN (6-36 FT/MIN)* ROTATIONAL SPEED OF BRUSH CAROUSEL...3-16 G/MIN* ROTATIONAL SPEED OF BRUSH SPINDLES...300-1150 G/MIN* (4) DUST EXTRACTION OUTLETS (170MM DIA / EA)* ACOUSTIC INSULATION...THIS SAN...
AMXmachinery
PARTE: 12572 - PRENSA DE RADIO FRECUENCIA - OGDEN
PARTE: 12572 - PRENSA DE RADIO FRECUENCIA - OGDEN
USADA - BUENAS CONDICIONES
Curing
area: 36” x 60” x 2” thick.
Clamping
pressure is applied by multi-power (dual pistons on a common shaft) pneumatic
cylinders to maximize pressure while relying on standard plant pressures.
Unlike presses without multi-power cylinders, which require booster
compressors, the Model SL36x60 reaches full capacity at 100-psi plant air
pressure.
Edge
pressure is applied by eight (8) each pusher ...
AMXmachinery
PARTE: 2CK-P24HV - CEPILLO - 1 CARA - CAPACIDAD 24” ANCHO – 7.5 HP - CABEZAL ESPIRAL
PARTE: 2CK-P24HV - CEPILLO - 1 CARA - CAPACIDAD 24” ANCHO – 7.5 HP - CABEZAL ESPIRAL
Nuevo con garantía230/1/60
electrics - 1 Fase
230/3/60
electrics) - 3 Fases
DESCRIPTION
SPECIFICATION
Maximum planing width
24″
Maximum planing thickness
8″
Feed speeds (2)
20 & 30 FPM
Main motor
7.5 HP
Cutterhead diameter
3-3...