Identificador: 458
Abierta
ID de articulo : # 458 se ha agregado a su lista de deseos.
Descripción
PARTE: 1SIL-R-SBC-41 - Par Guantes Repuesto para Cabinas de Sand Blast (arenado)
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 12598 - UNIDORA SABANAS CHAPA - FISHER+RUCKLE FZL-34 DELTA
PARTE: 12598 - UNIDORA SABANAS CHAPA - FISHER+RUCKLE FZL-34 DELTAUSADA – BUENAS CONDICONESFISHER+RUCKLE FZL-34 DeltaVeneer crossfeed splicing machine with pre-glued veneer sheetsVeneer strip length (in fiber direction) 750 - 3400 mm Veneer strip width (cross to fiber direction) 70 - 600 mmVeneer strip thickness (depending on veneer) 0.3 - 1.5 mmEC standardsYear 1998400V/50HzComplete of:- INTERMEDIATE CONVEYORThe intermediate conveyor serves at the same time as buffer to avoid dead times durin...
AMXmachinery
SIERRA ESCUADRADORA VERTICAL - COMPACT PLUS - CAP. 122” X 65” X 2-3/8”
PARTE: 2ST-COMPACTPLUS - SIERRA ESCUADRADORA
VERTICAL - COMPACT - CAP. 181” X 65” X 2-3/8”
NUEVA CON GARANTIAAll of the above, plus:• 15’1” cut length• Split full-length center shelf useful for
staging material• Y-axis digital measuring for horizontal cuts• Six template bar stops for setting common
rip cutsOptional:- For longer XL (6164) frame to cross-cut
17’6”- For taller (207) frames to cross-cut
6’9-1/2”
- For tallest (220) fr...
AMXmachinery
PARTE: 12608 - SIERRA RAJADORA – 1 SIERRA – NORTHTECH SRS-12
PARTE: 12608 - SIERRA RAJADORA – 1 SIERRA – NORTHTECH SRS-12Usada – Buenas condicionesManufacturer’s Specification 15 HP Motor + 1 HP feed motor (with Wye Delta soft start)Mechanical variable speed (45′ – 100′ FPM) provides a speed range for all material types and thickness ranges of 3/16”- 3-1/2”.Bottom & top kickback fingersRack and pinion fence for precise and quick positioningDigital electronic oiler provides maximum chain and race life15-1/2″ distance from column to bla...
AMXmachinery
SIERRA CINTA – VOLANTES 40” – 15 HP - CON ALIMENTADOR – PEHAKA
PARTE: 12226 – SIERRA CINTA – VOLANTES 40” – 15 HP - CON
ALIMENTADOR – PEHAKA
USADA – MUY BUENAS CONDICIONES
saw wheel
diameter 1050 mm
cutting height
max. 450 mm
hydraulic tilt table
45°
infeed roll
driven by motor
infeed speed
2,5/5/7,5/15 m/min.
motor power 11 Kw
(15 HP)
table size 1100
mm x 1050 mm
cutting width
(distance between saw stand and sawblade) 1020 mm
diameter of the
connection for a dust suction pipe
overall size: L
22...