Identificador: 43
Abierta
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
Descripción
PARTE: 2SB-FGZ-240-40 - ASTILLADORA PARA MADERA – DOBLE - DUAL - 75 & 60 HP
- MEJOR CALIDAD, PARA USO RUDO INDUSTRIAL CONTINUO
- MOTORES TEFC, 3/60/460/1800 CONECCION DIRECTA
- 2 SCREENS INCLUIDAS
- ROTOR DE USO RUDO Y BALANCEADO
MATERIAL A PROCESAR:
- DESPERDICIO DE CEPILLOS, ASTILLAS, ASERRADEROS, TROCERIA, ETC.
PRODUCTO FINAL:
- PELLETS, BRIQUETTES, COMBUSTIBLE PARA BOILERS, BIODIESEL, ESTABLOS PARA ANIMALES, ETC.
- DISPONIBLE CON UNA VARIEDAD DE TAMANOS DE SCREENS DESDE .020" A 3"
- VARIEDAD DE EXTRACTORES PARA MAXIMIZAR RESULTADOS
OPCIONALES:
- PAQUETE DE SEGURIDAD
- ARRANCADOR SUAVE DE MOTOR
- TRANSPORTADOR/ALIMENTADOR CON VIBRACION CON BASE DE SOPORTE
LA ASTILLADORA DUAL PRODUCE ASERRIN FINO Y EXTRAFINO EN 1 SOLA PASADA.
LA ASTILALDORA DUAL AHORRA ESPACIO Y MOVIMEINTOS
Model |
| Housing | Shaft Diameter | Rotor Width | Rotor Diameter | Bearings | Integral Fan System | Screen Area | Shaft Speed | Tip Speed |
240Z-80 | Upper Unit Lower Unit | 3/4” (20mm) 1/ 2” (12mm) | 3 1/4” (80mm) 3 1/4” (80mm) | 17 1/2” (440mm) 24” (610mm) | 24” (610mm) 24” (610mm) | 2 15/16” (70mm) 2 15/16” (70mm) | N/A 5000 CFM | 442 sq inches (2850 sq cm) 912 sq inches (5880 sq cm) | 3600 RPM 3600 RPM | 22600 22600 |
280Z-90 | Upper Unit Lower Unit | 3/4” (20mm) 3/ 4” (20mm) | 3 1/4” (80mm) 5” (130mm) | 24” (610mm) 36” (900mm) | 24” (610mm) 24” (610mm) | 2 15/16” (70mm) 3 7/16” (90mm) | N/A C/F | 624 sq inches (4140 sq cm) 1368 sq inches (8825 sq cm) | 3600 RPM 3600 RPM | 22600 22600 |
290Z-100 | Upper Unit Lower Unit | 1” (25mm) 1 ” (25mm) | 5” (130mm) 6 3/8” (160mm) | 36” (900mm) 48” (1220mm) | 24” (610mm) 24” (610mm) | 3 7/16” (90mm) 3 7/16” (90mm) | N/A C/F | 936 sq inches (6040 sq cm) 1824 sq inches (11780 sq cm) | 3600 RPM 3600 RPM | 22600 22600 |
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
MEDIDOR DE HUMEDAD PARA MADERA – CON 2 PINS - LIGNOMAT – MINI-LIGNO E/D
PARTE: 2LI-ED-0 - MEDIDOR DE HUMEDAD PARA MADERA – CON 2 PINS - LIGNOMAT – MINI-LIGNO E/DNuevo con garantíaMeasuringRange6-45%DisplayBright LED display with 0.1% resolution below 10% and 1% steps above 10%. Lifetime warranty for the most durable display.SpeciesCorrections2 Wood groups for softwoods and hardwoods, wood-based panel productsCalibrationStable calibration not affected by ambient temperature. Calibration is internally checked and automatically adjusted if necessary. All mini-Li...
AMXmachinery
HORNO PARA CERAMICA, VIDRIO, METALES - EXTRA HEAVY DUTY - 118 LITROS
PARTE:
2PG-IGUANA - HORNO PARA CERAMICA, VIDRIO, METALES - EXTRA HEAVY DUTY - 118
LITROS240V, 1 Fase, 10,800 Watts, 45 AmpsMedidas interiores: 457 mm ancho x 457 mm fondo x 457 mm altoVolumen interior: 118.93 litrosMax. Temperatura: 1287 grados centígradosNuevo con garantíaPowered with reliable extra heavy-duty elements. This results in long element life, because the elements do not “struggle” to reach high temperatures. 10,800 watts heat the 18” wide, 18” deep, 22 ½” high interio...
AMXmachinery
PARTE: 12340 - COMPRESOR DE TORNILLO - 30 HP
PARTE: 12340 - COMPRESOR DE TORNILLO - 30 HP
USADO
- MUY BUENAS CONDICIONESCoAire CHSA-30
230/440V,
60 Cy, 3 Phase
Main
Motor: 30 HP
Discharge
Pressure: 150 PSI
Air
Delivery: 100 CFM
Compressor
Speed: 3050 RPM
Ambient
Temperature: 32 Deg. - 115 Def. F
Driving
Method: V-Belt (3VX4)
Oil
Sump Capacity: 5 Gallons
Dimensions:
55-1/2" L x 40-3/8" W x 48-1/2" H
Weight: 1232Filters have been replaced, its been flushed out and has new
oil.The last hours recorde...
AMXmachinery
SIERRA TRONZADORA – 7.5 HP - DISCO 14" - IZQUIERDA
PARTE: 12347 - SIERRA TRONZADORA – 7.5 HP - DISCO 14"
- IZQUIERDA
USADA
- BUENAS CONDICIONESMotor 7.5 HP, 220V, 3 phase4100 RPM arbor speedLeft Hand Model uses a 14” diameter saw blade with 1” boreCuts boards up to 1” x 10” or 2”x 9”, 3” x 8” at a rate of up to
95 strokes per minuteStandard full coverage safety guardTable size is 25” x 23-1/4” with a table height of 32-3/4”Requires 600 CFM air supply, and has a 4” diameter dust portMachine weighs 530 lbsOverall di...