Identificador: 4
Abierta
ID de articulo : # 4 se ha agregado a su lista de deseos.
Descripción
PARTE: 2EB-SF-U3R8 - AFILADOR DE BROCAS Y CORTADORES RECTOS UNIVERSAL
Maquina ara afilado para diferentes tipos de cortadores, brocas, para metal, madera, etc
Videos de la maquina: Video 1
Características:
1. Concise and easy, and grind out in a straight line.
2. Strength increase, increase the service life of blade and processing capacity.
3. High grinding accuracy, easy to install, aesthetically pleasing, novel structure, flexible the rotating parts, low noise, small vibration, tool post part bearing, durable, wear-resisting,
4. All kinds of diameters, shapes, Angles of the carving knife according to the proportion of engraving corresponding grinding.
PARAMETERS:
5 types R8 Collects | 0.15''=4mm, 0.2''=6mm, 0.3''=8mm, 0.4''=10mm, 0.5''=12mm. |
Grinding Dia. | ф0-100mm(0-3.94") |
Motor | 110V, 60 HZ, 1/3 HP, 2,800 RPM |
Taper Angle | 0°-180° |
Relief Angle | 0°-45° |
Negative Angle | 0°-26° |
Grinding Spindle | 5200r.p.m. |
Cup grinding wheel | 100x50x20mm(3.9*2.0*0.8") |
Net Weight | 99LB (45kg) |
Packing dim. | 55x65x47cm (21.7*25.6*18.5") |
Manufacturer/seller reserves the right to change any specifications without notice.
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PRENSA - GRABADORA DE MOLDURAS – DIFERENTS DISENOS – 2 MAQUINAS
PARTE: 12243 – PRENSA - GRABADORA
DE MOLDURAS – DIFERENTS DISENOS – 2 MAQUINAS
USADA – BUENAS CONDICIONES
Mfg
1981
Electric 230 volt, 60 cycle, 3 phase
Press
width 450mm (17.71")
Material
max width 500mm (19.68")
Material
Speed 200-1000 Meters per hr. (650 -
3200 ft)
Engraving
depth 3mm
Dual
propane torch heaters
Includes
Wheels as shown (100 - 250 mm diameter wheels)
Shipping
Footprint: 6 (length) x 6 (width) x 5 (height)
Weight: 25...
AMXmachinery
TEMPLATE MAKER - AREA TRABAJO 8” x 12” - TEMPLATE MAKERS
PARTE: 12368 - TEMPLATE MAKER - AREA TRABAJO 8” x 12” - TEMPLATE
MAKERS
NUEVO - NUNCA USADOInformation from manufacturer:For making templates for grinding
moulder knives. it have never been out of the original packing, So basically
brand new without warranty Here is the web site to the company that the machine
was purchased from a few years ago
http://www.templatemakers.com/cnc_technology/ So you can grind the moulder
knives. fully loaded machine . All the bells and whistles. revers...
AMXmachinery
PARTE: 1SE-0021 - FINGER JOINT - PRENSA
PARTE: 1SE-0021 - FINGER
JOINT - PRENSA
Nuevo con garantía en
partes mecánicas solamente
3 pistones neumáticos
para movimientos de las prensas
Filtro y regulador de
presión
Válvula neumática de 3
posicionesVideo: https://vimeo.com/854503314
AMXmachinery
PARTE: 12305 - CABEZALES PARA MOLDURADORA - LARGO 2.25” - FLECHA 1-13/16" - FLECHA 2 -1/8"
PARTE: 12305 -
CABEZALES PARA MOLDURADORA - LARGO 2.25” - FLECHA 1-13/16" - FLECHA 2 -1/8"SIN BUJE FLECHA 2-1/8"
USADOS - MUY BUENAS CONDICIONES
North American
Gladu hydro-lock
6 alas
20 grados
Diámetro interior - Flecha: 1-13/16"
Diámetro exterior: 6” (150 mm)
Largo 2-1/4” (57 mm)