Identificador: 398
Abierta
ID de articulo : # 398 se ha agregado a su lista de deseos.
Descripción
PARTE # 2-EX-ET-150 - TROMPO - MOTOR 7.5 HP - CON FLECHA DE 1-1/4"
PARTE # 2-EX-ET-160 - TROMPO - MOTOR 10 HP - CON FLECHA DE 1-1/4”
Nuevo con garantia
Engineered for continuous industrial use, the shapers are great machines for demanding applications. The large work area, reversable spindle, optional digital readout, and powerful motors ensure clean, safe and efficient production.
3 spindle speeds: 5.5, 7.5 and 10K RPM
Reversable
Magnetic starter
Precision fence assembly
Table inserts
Front access panel
Spindle lock
Micro adjust left and right positioning
Spindle brake
Emergency stop
Optional digital readout
| 2-EX-ET-150 |
Main Motor | 7.5HP |
Phase | 3 |
Spindle RPMs | 5.5/7.5/10K |
Table Size (in) | 46x34 |
Max Diameter Opening | 12-3/8" |
Spindle Travel | 6-1/2" |
Included Spindles | 1-1/4 Fixed |
3/4" Spindle (in) | *** |
1" Spindle (in) | *** |
1-1/4" Spindle (in) | 5-13/16" |
Included Collet Adapters | NA |
Interchangeable Spindles | No |
CFM Requirements | 750 |
Sliding Table Travel | NA |
Amps | 18 |
Weight | 1250 lbs |
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
ROUTER INVERTIDO ONSRUD 3025
PARTE # 10098MARCA: C.R. ONSRUDMODELO: 3025FECHA: 1997MOTOR 5 HP, 3 PH, 230V, 60 HZ30” CAPACIDAD GARGANTA20,000 RPMBROCA VIAJA 0-3”PEDAL NEUMATICO3 POSICIONES DE PROFUNDIDAD DE LA BROCA
AMXmachinery
MOLDURADORA - 6 CABEZALES - WENIG HYDROMAT 22 AL
PARTE:
12264 - MOLDURADORA - 6 CABEZALES - WENIG HYDROMAT 22 AL
USADA - BUENAS
CONDICIONES
Mfg. 1995
6 heads, chrome beds, feed table,
6 8" heads
2 1/8" spindles
All paperwork
One owner machine, hardly used
AMXmachinery
ESPIGADORA 1 LADO - FINGER JOINT
PARTE: 2TA-SET-60 - ESPIGADORA 1 LADO - FINGER
JOINTFeatures:It performs cut off, burrs trimming, and moulding
functions.Two 4" D x 5" L max. tenon cutters, cope spindle
accepts general shaper cutter. Suited for cutting tenons, finger joints for
window or doorframe and general joint-tenon.Hand, manual operated clamping and feeding of stock.First the trim saw to cut off the end of stock evenly.Then two moulding, tenon spindles are mounted at the rear
of saw enable machine performs edge moul...
AMXmachinery
ENCHAPADORA DE CANTOS MANUAL – PRE-ENCOLADOS HASTA 3 MM ESPESOR - VIRUTEX
PARTE # 1VX-VI-AG98R - ENCHAPADORA DE CANTOS MANUAL – PRE-ENCOLADOS HASTA 3 MM ESPESOR - VIRUTEXEnchapadora de Cantos Manual para Chapas o Cintas Pre-EncoladasNueva con garantíaPara el aplacado de cantos pre-encolados de P.V.C., poliester, melamina y chapa de madera. Permite el aplacado de piezas circulares o con formas. Su especial diseño de mordazas regulables permite realizar el trabajo con una gran precisión y estabilidad. Práctico sistema de corte del canto incorporado. Posibilidad de...