Identificador: 395
Abierta
ID de articulo : # 395 se ha agregado a su lista de deseos.
.png)
.JPG)
.JPG)
.JPG)
.JPG)
Descripción
PARTE # 2AM-410 - TROMPO/PULIDOR CON ALIMENTADOR INTEGRADO PARA MOLDURAS RECTAS Y CURVAS
Shaper Motor: 7.5 HP Belt Driven
Shaper Spindle Speed: 4000-7000 rpm
Shaper Spindle: 1-¼" Dia.
Sander Motors: 1.5 HP Direct Drive
Sander Spindle Speed: 400-1800 rpm
Sander Spindles: 1" Dia. by 4" Tall
Voltage: 208-240V 3ph, 30A
208-240V 1ph, 40A
440V 3ph, 15A
Conveyor: 6" Wide, 4 rows of tires
Vertical Adjustment: Yes, with digital counters
Horizontal Adjustment: Yes, with digital counters
Sanding Wheel Tilt: 60º Forward; 40º Back
Fence: 5 adjustable stops
Table Height: 36 inches
Size: 75" x 36" x 54"
Weight: 1325 lbs
Plantilla Centradora para curvas - opcional
Designed and manufactured to give years of dependable service, the Larick 410 will shape and sand a wide variety of workpieces. Features include a 6" wide feed chain with four staggered rows of hold down tires; front adjusting handwheels with digital readouts for horizontal and vertical shaper and sander positions; AC inverter controlled variable speed for shaper, sanders, and feed featuring digital readouts for speed and load; floating heads are optional which allow shaping and sanding of arched panels. The user friendly design makes setup and profile changeovers quick and easy.
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 12597 - TRITURADORA - BLOAPCO - MODELO 7-6
PARTE: 12597 - TRITURADORA - BLOAPCO - MODELO 7-6USADO – BUENAS CONDICIONES - RECONSTRUIDOMax trim width 7.5"Shear Cutting ActionRotor Speed 500 to 3,600 rpm1 HP motorModel 7-6 provides cutting via one stationary bed knife and two rotating knives provides two cuts per revolution. The open-rotor design facilitates free passage of air and material. Shear-cut action for paper and tough, thin film and foil. Total weight is 135 pounds17"L x 13.25W x 22.5H
AMXmachinery
PARTE: 1SL-DC-DP16NF – TALADRO DE COLUMNA, MOTOR 3/4 HP, 110V, 1 FASE
PARTE: 1SL-DC-DP16NF – TALADRO DE COLUMNA, MOTOR 3/4 HP, 110V, 1 FASENUEVO CON GARANTIAMOTOR: 3/4 HP, 110V, 60 Hz, 1 FASE16 VELOCIDADES: 220 - 3320 RPMCHUCK: 3 A 16 MM (5/8")DISTANCIA DEL CHUCK A COLUMNA: 175 MMCARRERA CHUCK: 83 MMDISTANCIA DEL CHUCK A LA MESA: 595 MMDISTANCIA DEL CHUCK A LA BASE: 1780 MMDIMENSIONES DE LA MESA: CIRCULAR DE 290 MMDIMENSIONES TOTALES: 1570 MM X 600 MM X 300 MMPESO: 69 KGSEMPAQUE: 1 CAJA
AMXmachinery
MADERA ASERRADA - DIMENSIONADA
MADERA ASERRADA - DIMENSIONADACAPACIDAD POR CAMION - CADA 2 SEMANAS15,000 - 17,000 pies en
5/8 X 3-1/4 X 64”
3,000 - 5,000 pies en 5/8 X 3-1/4 X 70”
MADERA ASPERTA PARA TARIMAOPCIONES:- VERDE SIN MANCHA- SECADA AL AIRE
AMXmachinery
EXTRUSORA DE 4” DIAMETRO
PARTE # 2CE-EX004 – EXTRUSORA DE 4” DIAMETRONUEVA CON GARANTIAHECHA DE ALUMINIOPARA USO CON PORCELANA, BARRO Y YESOSE REMUEVE EL BARRIL PARA LIMPIEZA FACILMUY VERSATIL PARA CAMBIOS DE BARRO BLANCO A ROJOINCLUYE 2 PLANTILLAS PARA DISENOS EN BLANCOSE REMUEVEN LAS TAAS PARA CAMBIO RAPIDO DE DISENO