Identificador: 37
Abierta
ID de articulo : # 37 se ha agregado a su lista de deseos.
Descripción
PARTE # 2RT-R200E/A - MESA ARMADORA BASTIDORES - PIES 5X12
5'x12' Assembly Table
Hold Down Beam with (5) Adjustable Hold Down Cylinders
45 Degree Vertical Easel
Squaring Bars on Right, Left, and Bottom Sides
1" Thick Formica Surfaced Table
Heavy Duty Steel Frame
Screw Driver Not Included
Crated Dimensions: 67" X 168" X 30" H and 2152 Lbs
Options:
- R200A - Additional Beam Assembly
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
ESCOPLO – MESA MOVIBLE – 1 LADO - MAKSIWA
PARTE: 2MK-FH.16.C - ESCOPLO – MESA MOVIBLE – 1 LADO - MAKSIWAMobile table, appropriate to drill horizontally in wood with straight cutter or drill. It has eccentric clamping device, articulated arms and extended base. It is conceptually different from the other drills in that during operation, the table is lifted into the work piece. 2 Year Warranty. SpecificationsMobile table dimensions: 18-1/8" x 7-4/8"Horizontal table track: 5-3/8"Vertical table track: 8-5/8"Chuck track: 4-7/8"Chuck cap...
AMXmachinery
PRENSA DE TABLEROS – 20 SECCIONES – TAYLOR
PARTE # 11913 - PRENSA DE TABLEROS – 20 SECCIONES – TAYLOR8.5 ft. wide with approximately 6 clamps per sectionClamps are standard 2-1/2” high jaws by 32” openingIncludes air tightener and panel flattenerMachine was new in 1983Good conditions
AMXmachinery
PARTE: 1SIL-DC-FURM-70 – BASTONERA – MOTOR 5 HP - CAPACIDAD DE 1/2” - 2”
PARTE: 1SIL-DC-FURM-70 – BASTONERA –
MOTOR 5 HP - CAPACIDAD DE 1/2” - 2”BASTONERA PARA FABRICAR PALO REDONDO ESCOBA Y PERNOS Nueva con garantiaCapacidad: Redondos de ½” a 2” de diámetro (10MM a 65 MM)Motor principal: 5 HP, 220V, 60 Hz, 3 fasesMotor alimentador: 1 HP, 220V, 60 Hz, 3 fasesVelocidad de corte: 2,900 RPMVelocidad de alimentación: de 6 a 21 metros por minuto (240” a 520” por minuto)Peso neto: 350 KGSPeso Bruto: 510 KGSTipo de empaque: 1 cajaMedidas de la Caja: ...
AMXmachinery
ESPIGADORA DOBLE DE CADENA - FRIULMAC
PARTE: 12416 – ESPIGADORA DOBLE DE CADENA - FRIULMAC
USADA - BUENAS CONDICIONESModel
ContouramatThe
ideal solution for double-end trimming and coping, with only one operator
required!Working
Length: 115 - 1500mm (4.52" - 59")Working
Width: 30mm - 250mm (1.18" - 9.84")Working
Thickness: 12mm - 50mm (0.47" - 1.96")Configuration:
Double-End Trim & Double-End Cope/ProfilingLeft
& Right Trim Motors: 4 HP EachTrim
Blade Diameter: 125mm - 180mmTrim
Blade Bore: 30mmLeft
& Right Cope/Prof...