Identificador: 353
Abierta
ID de articulo : # 353 se ha agregado a su lista de deseos.
.jpg)
.jpg)
Descripción
PARTE # SIL-DC-SBR14-45 - SIERRA RADIAL - MOTOR 4.5 HP
Nueva con garantia
Motor 4.5 HP, 220V, 60Hz, 3 fases
Medidas de la mesa 34-1/2” x 43-1/4”
Diámetro del disco 14”
Diámetro del eje 1”
Máxima capacidad de corte transversal 24-3/8”
Máximo espesor de corte 4-1/8”
Movimiento angular del brazo 45 - 0 - 45 grados
Movimiento angular del motor 0 – 22 – 45 – 90 grados
Giro del motor 0 – 180 grados
Peso de la maquina 200 kilos
Tipo de empaque 1 caja
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 2TA-SFJ-4500A - PRENSA ENSAMBLADORA FINGER JOINT - 181” LARGO
PARTE: 2TA-SFJ-4500A - PRENSA
ENSAMBLADORA FINGER JOINT - 181” LARGOFeatures:
Very efficient automatic
machine that performs three functions:
Jointing of
sectional sticks which have been glued
Cutting the jointed
sticks to desired length
Final assembly is
securely pressed by powerful hydraulic system
Then the jointed
sticks be fed out regularly
Auto power feeder
for fast feeding and auto stops at the desired length to be cut.
Furnished with
cut-off saw as standard ...
AMXmachinery
PARTE: 12611 - SIERRA RAJADORA – 1 SIERRA – MATTISON
PARTE: 12611 - SIERRA RAJADORA – 1 SIERRA – MATTISONUsada – Buenas condicionesModelo: 404Main Motor: 15 HPTable Size: 65" x 77"Throat Size: 24-1/4"Feed Motor: 2 HPFour-Speed Feed: 62, 93, 124, & 186 FPMInfeed Rip Fence w/ Two StopMaximum Stock Thickness: 4"Largest Diameter Blade: 14"Manual Arbor Raise/Lower Via Manual Hand-CrankSpindle Speed: 3,600 RPMCurrent Voltage: 440v, 3phMfg. 1984
AMXmachinery
LAMPARA REPUESTO
PARTE: SIL-R-SBC-3 - Lampara de Repuesto para las cabinas de sand blast (arenado)
AMXmachinery
SIERRA DOBLE 45 GRADOS – 2 SIERRAS 14” - PISTORIUS EMN-14
PARTE: AMX-10028 - SIERRA DOBLE 45 GRADOS – 2 SIERRAS 14” - PISTORIUS EMN-14Used - Excellent conditions – Used for samples only2 Motors 2 HP,
208/230/460 Volts, 60 Hz, 3450 RPMSaw harbor
5/8"Dust exits 2 of
4" diameter, requres aprox. 850 CFMAir use 72 CFM at
65 PSI based in 15 cycles/minTable height
36-1/8" (917 mm) Pneumatic pedalEach cut takes 4 to
6 seconds
Weight 405 lbs (184 kg)