Identificador: 330
Abierta
ID de articulo : # 330 se ha agregado a su lista de deseos.
Descripción
PARTE # 2DO-CONCEPT-2600 - SIERRA DE PANELES AUTOMATICA
An Innovative and Surprisingly Affordable Beam / Panel Saw ... 100% Made in Italy
As compared to a Sliding Table Saw or Vertical Panel Saw, Concept 350 is more accurate, is easier to operate, is much safer, and can be up to 3x more productive !
Allows the small to mid-sized shop to advance with capacity and accuracy previously only available to larger operations with much larger machinery budgets.
Occupies about the same footprint as a sliding table saw but doesn't require valuable floor space in front or behind like a sliding table saw does.
Side-by-side comparison proved Concept 350 can be up to 3x more productive than a slider.
Extremely easy to use ... and there is no complicated programming to learn.
Sizes panels accurately and chip free with a very unique single blade scoring function.
Bevel cutting of 0-46 degrees is possible with the standard electronically controlled blade tilt.
The large diameter blade in conjunction with the massive pressure beam allows the operator the ability to safely stack or book cut multiple panels.
The 300 - 350 mm blade is completely enclosed during the entire cutting cycle thus insuring operator safety.
Video de la maquina funcionando: VIDEO 1
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 1SL-DC-DP16NF – TALADRO DE COLUMNA, MOTOR 3/4 HP, 110V, 1 FASE
PARTE: 1SL-DC-DP16NF – TALADRO DE COLUMNA, MOTOR 3/4 HP, 110V, 1 FASENUEVO CON GARANTIAMOTOR: 3/4 HP, 110V, 60 Hz, 1 FASE16 VELOCIDADES: 220 - 3320 RPMCHUCK: 3 A 16 MM (5/8")DISTANCIA DEL CHUCK A COLUMNA: 175 MMCARRERA CHUCK: 83 MMDISTANCIA DEL CHUCK A LA MESA: 595 MMDISTANCIA DEL CHUCK A LA BASE: 1780 MMDIMENSIONES DE LA MESA: CIRCULAR DE 290 MMDIMENSIONES TOTALES: 1570 MM X 600 MM X 300 MMPESO: 69 KGSEMPAQUE: 1 CAJA
AMXmachinery
LIJADORA PARA CURVOS Y RECTOS BRUSA LT-80
PARTE # 10070 - LIJADORA PARA CURVOS Y RECTOSMARCA: BRUSAMODELO: LT-80PARA PULIR- PALO DE ESCOBA- REDONDOS- MANGO DE HERRAMIENTA- MOTOR ALIMENTADOR, 0.25 KW, 220 VOLTS, 60 Hz- MOTOR PRINCIPAL LIJA, 5 HP, 220/440 VOLTS, 60 Hz, 1450 RPM- MOTOR OSCILADOR, GIRA PARA REDONDEAR, 5 HP, 220/440 VOLTS, 60 Hz, 1400 RPM- AJUSTE MANUAL, DIAMETRO ANCHO DE PIEZA PARA CADA LIJA 0 - 80 mm
AMXmachinery
LIJADORA ORBITAL – TIMESAVERS
PARTE: 12155 – LIJADORA ORBITAL – TIMESAVERS
USADA – BUENAS CONDICIONES
Cabeza
Orbital y Cabeza de cepillo Quickwood de-nibbing
AMXmachinery
PARTE: 2GM-HS-0412-MD-3 - GUILLOTINA HIDRAULICA - DELUXE
PARTE: 2GM-HS-0412-MD-3 - GUILLOTINA HIDRAULICA - DELUXEModelos Disponibles:HS-0412MD, 4’x12Ga. 3 HP, 220//440V, 3 PH, 24” manual back gaugeHS-0410MD, 4’x10Ga. 5 HP, 220440V, 3 PH, 24” manual back gaugeHS-0610MD, 6’x10Ga. 5 HP, 220/440V, 3 PH, 24” manual back gaugeHS-0810MD, 8’x10Ga. 7.5 HP, 220/440V, 3 PH, 24” manual back gaugeHS-1010MD, 10’x10Ga. 7.5 HP, 220/440V, 3 PH, 24” manual back gaugeHS-1014MD, 10'x14Ga. 5 HP, 220V, 3 PH, 24" manual back gauge