Identificador: 289
Abierta
ID de articulo : # 289 se ha agregado a su lista de deseos.
.jpg)
.jpg)
Descripción
PARTE # 2TA-BS-1212HR-5 - REASERRADORA HORIZONTAL - 5 SIERRAS
NUEVA CON GARANTIA
| Specifications | BS-1212HR-TN | BS-1616HR-TN |
|---|---|---|
| Max. Cutting Capacity | 12" x 12" | 16" x 16" |
| Distance between Blade to Conveyor | 1/4" ~ 12" | |
| Saw Wheel Diameter | 28" x 2 | |
| Saw Blade Length (Width) | 201" (2") | 201" (2" ~ 3") |
| Saw Blade Speed | 6000 FPM | |
| Feed Conveyor Width | 12" | 16" |
| Feed Speed (Variable) | 0 ~ 90 FPM | |
| Main Motor (Each Head) | 20 HP x 2 | 30 HP x 2 |
| Saw Blade Lift Motor | 1/2 HP | |
| Feed Conveyor Motor | 3 HP | |
| Dust Hood | 4" x 6 | |
| N. W. | 7200 LBS | 8600 LBS |
- Machine was built with ruggedly constructed throughout for maximum stability, high precision cutting and minimum trouble.
- It is equipped with a digital controller for convenient and accurate thickness setting.
- The feed conveyor has a tilting design allowing for maximum 30 degree bevel cuts.
- When the feed conveyor is tilted for bevel cutting a side support is applied for safe and stable cutting operations.
- Variable feed speed is controlled by a frequency inverter for best cutting requested.
- The infeed and outfeed pressure rollers are easily raised or lowered by a gear rack.
- The infeed and outfeed pressure rollers are spring loaded and easily adjusted for the horizontal or vertical direction to suit various workpiece thicknesses.
- Blade tension is adjusted by means of a hand wheel.
- A tension scale allows the operator to correctly adjusted the tension for different blade thickness.
- The cast iron saw blade wheel are dynamically balance for smooth running.
- Blade guard is easily lifted up, supported by two nitrogen gas cylinders for convenient blade change.
- The roller type return conveyor equipped at left side of the machine provides easily repetitive cutting.
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
ENCHAPADORA - CEHISA - PRO 8
PARTE: 12262 - ENCHAPADORA - CEHISA -
PRO 8
USADA - MUY BUENAS CONDICIONES
220V, 3 FASES, 60 HZ
TOTAL HP 7.58
SINGLE LARGEST HP 5.58
TOTAL AMPS 17.2
GLUE TANK: M-5
STATIONS:
- END TRIMMING
- TRIMMING
- POLISHING
AMXmachinery
COMPRESOR DE TORNILLO - 50 HP
PARTE: 12341 - COMPRESOR DE TORNILLO - 50 HP
USADO - BUENAS CONDICIONES
230/460V
Nominal 100 PSI, 110 Maximum
Nominal 236 Cubic Feet Per Minute Depending on Pressure
Setting
Variable Frequency Drive
Weight: 3000 lbs
Dimensions: 48" L x 72" W x 64" H
Recently serviced and ready to go!
AMXmachinery
ALIMENTADOR AUTOMATICO - 1/4 HP
PARTE # SIL-DC-AF32 - ALIMENTADOR AUTOMATICO - 1/4 HPMOTOR: 1/4 HP, 220V, 60 HZ, 2 FASES4 VELOCIDADES REVERSIBLES, 6, 8, 10 Y 13 MTS/MINPUEDE TRABAJAR EN POSICION VERTICAL Y HORIZONTAL
AMXmachinery
PARTE: 12619 - PRENSA DE TABLEROS – 6 SECCIONES – QUICK
PARTE: 12619 - PRENSA DE TABLEROS – 6 SECCIONES – QUICKUSADO – BUENAS CONDICIONESAvance y apriete neumático