Identificador: 282
Abierta
ID de articulo : # 282 se ha agregado a su lista de deseos.
Descripción
PARTE: 2TA-CM-200LG - PERSIANERA PARA HACER SHUTTERS
Features:
- A faster round louver groove mortise machine provides variable oscillating speed.
- Distance between the slot is controlled by the template.
- Two working tables built in both side of the machine to double the production for high efficiency mortising operation.
- Automatic pneumatic hold down clamps
- Fully automatic mortise produce cycles.
- Pneumatic pistons for drilling depth speed control, enable for best results.
- Depth of mortising is easily adjustable.
- Powerful industrial motor for maximum cutting capacity.
- Precision sealed long life bearing.
- Heavy cast iron frames and table for durability usage.
| Specifications | CM-200LG |
|---|---|
| Slot per Minute on 2 Working Pieces | 20 holes |
| Adjustable Slot | 0°~90° |
| Max. Depth of the Slot | 1" (30 mm) |
| Max. Size of the Working Piece | 4" x 5" (100 x 130 mm) |
| Min. Size of the Working Piece | 0.39" x 1" (10 x 30 mm) |
| Bits Rotation | 12000 RPM |
| Bits motor Power | 5 HP |
| Sliding Motor | 1 HP |
| Machine Size | 158" x 45" x 47" (4000 x 1140 x 1200 mm) |
| Packing Size (Packing Mold) | 118" x 4" x 2" (3000 x 100 x 40 mm) |
Packing Size(Packing Machine) | 83" x 45" x 55" (2100 x 1145 x 1400 mm) |
| N.W. | 1962 LBS (890 kg) |
| G.W. | 2315 LBS (1050 kg) |
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
INDEX TABLE
PARTE # 11903 – INDEX TABLE – EVANS MACHINERY 4253Very good condition5' x 12' capacityIncluding roller section between panel support railsRails equipped with beveled rollers to transport panel to end stopEnd stop with bump switch to activate panel dropPanel is driven to end stop with powered drive rollerElectric 230 volt, cycle, 3 phase
AMXmachinery
PARTE: 12622 - LIJADORA DE CEPILLO – 39” ANCHO - ALPHA BRUCH
PARTE: 12622 - LIJADORA DE CEPILLO – 39” ANCHO - ALPHA BRUCHUSADA – MUY BUENAS CONDICIONESMarca Alpha BrushModelo KS-MSMfg 2017Voltage 200-230VMax working width 1000mm (39") Key Features of the KS-MS Brush Sander:Equipped with two top sanding drums. Capable of sanding wood, metal, plastic, and composites.Adjustable Speeds:Sanding Drums: Variable rotation speed.Conveyor: Separate adjustable speed control for the conveyor belt.Features a fast "change out" system for switching brushes for d...
AMXmachinery
RESACADORA DOBLE – 48” CAPACIDAD LARGO
PARTE: 2FA-2NX-48 – RESACADORA DOBLE
– 48” CAPACIDAD LARGO
NUEVA CON GARANTIA
HASTA 4,000 RESAQUES/HRStandard FeaturesAdjustable
Notch up to 3"Variable
SpeedAlmost Unlimited Capacity Machine
SpecsDimensionsLength:
Model Dimensions 24"Width:
73"Height:
56"Infeed
Height: 40" PowerCutter
Head Motors: 20HP 208/230/480/3/60 TEFCInfeed
Motor:1-1/2 HP 208/230/480/3/60 TEFCVFD:
For lnfeed Motor Variable SpeedCompletely
Pre-Wired Motor Starter with Start/Stop Buttons and Circu...
AMXmachinery
MOTOR - PARA ABANICO 30” DIAMETRO - MOTOR 120V, 3.32 AMP
PARTE: AMX-10143 - MOTOR - PARA ABANICO 30” DIAMETRO -
MOTOR 120V, 3.32 AMP
USADO - BUENAS CONDICIONESMOTOR: 120V, 60 HZ, 3.32 AMP