Identificador: 2660
Abierta
ID de articulo : # 2660 se ha agregado a su lista de deseos.
Descripción
EXTENSION PARA TARIMAS LARGAS
Distancia del inicio del barrote a donde empieza el resaque:
Rango maquina tamaño standard: 5-1/2” – 24-3/4”
Rango con extensión: 30” – 38”
Para mas informacion y especificaciones contactenos
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
ESPIGADORA 2 MESAS
PARTE: 2TA-SET-100 - 3YC-YRT-115 - ESPIGADORA - 2 MESAS - AMX MACHINERYNueva con garantiaBuilt with two working tables for high efficiency operations.Table longitudinal traverse is pneumatic operated for smooth cutting.Tenon’s width is easily adjustable by hand wheel.Convenient tenon depth adjustment from outside without removing covers.Table can be tilted to 20 degrees at each side for angular tenon.Cutter moving speed is infinitely adjustable to achive the best results.Pneumatic hold down c...
AMXmachinery
SOLDADORA DE SIERRA CINTAS - 10 – 40 mm
PARTE # 4VF-VC4 – SOLDADORA DE SIERRA CINTASReliable, inexpensive and very easy to use.Manual welding and annealing.Shear included.Steel Band Width [min-max]: 10 – 40 mmBand Thickness [min-max]: 0,5 – 1,1 mmPower Absorbed: 4,5 kWNet – Gross Weight: 51 – 72 kgMachine Dimensions [D x W x H]: 49 x 52 x 32 cmPacking Dimensions [D x W x H]: 62 x 82 x 50 cm
AMXmachinery
RESACADORA SENCILLA – 60” CAPACIDAD LARGO
PARTE: 2FA-NXL-48 – RESACADORA SENCILLA
– 60” CAPACIDAD LARGO
NUEVA CON GARANTIA
HASTA 800 RESAQUES/HRStandard FeaturesCutter Head is Never ExposedTable Moves w/Dual Air Rams Á Linear BearingsDouble Clamp System Machine SpecsDimensionsLength: 60"Width: 90"Height: 50"Table Height: 37" Power20 HP Electric Motor: 208/230/480/3/60 TEFCCompletely pre-wired motor starter with start/stop
buttons and circuit overload protection SpecificationsArbor & Bearing Size: 2"Approx. 2000 lbsTabl...
AMXmachinery
PARTE: 12650 - CEPILLO - 4 CARAS - 24” ANCHO - PINHEIRO
PARTE:
12650 - CEPILLO - 4 CARAS - 24” ANCHO -
PINHEIRO
Usado – Muy buenas condiciones
24" max. planing width
20" max. moulding width
3" min. moulding width
8" max. thickness capacity
16" min. length workpiece unbutted, 9" butt fed
7.5 HP top head
5.5 HP bottom head
side heads are 17.5 HP each
4 HP variable speed feed 20 to 100 FPM
Top and bottom heads are 4-knife straight knife cutter heads
Side heads are 5" dia. X 8" long 4-knife corrugated bac...