Identificador: 266
Abierta
ID de articulo : # 266 se ha agregado a su lista de deseos.
ID de articulo : # 576 se ha agregado a su lista de deseos.
Descripción
PARTE: 2TE-0001 – SOLDADORA DE MADERA – ALTA FRECUENCIA
Nuevo con garantía
Features:
Weight | 150 lbs |
Dimensions | 66 × 43 × 44 cm |
Supply | 240 volt / 50hz (standard 13-amp 3-pin plug) |
Generator frequency | Nominal 27.2 Mhz |
Curing speed | 3 – 10 seconds per weld |
Penetration | 50mm effective |
Output | 0.5 – 0.6 amps at 2400 volts (internal HT) on load |
Finish | Hardwearing powder coated finish |
Electrical Safety | Cabinet and fittings are fully earthed. Cutout switch isolates main power if rear access panel is removed. 10 amp panel-mounted fuse for protection. |
Hand gun specification | Lightweight, easy to use hand gun. Incorporates on/off trigger, thumb-operated fine tuning control and R.F. power indicator meter. Supplied with 2 sets of electrodes. |
Servicing and maintainance | A comprehensive range of spares are available and can usually be delivered next day. Repairs can be carried out within 1 – 2 days. |
Warranty | All new machines are covered by a standard 12-month warranty from the date of purchase. |
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: AMX-10158 - EXTRACTOR - ALUMINIO - MOTOR 3 HP - NORTH AMERICAN MFG
PARTE: AMX-10158 - EXTRACTOR - ALUMINIO - MOTOR 3 HP -
NORTH AMERICAN MFG
USADO - BUENAS CONDICIONES
MARCA:
NORTH AMERICAN MFG. CO.
MODELO:
1-401
HECHO EN USA, CLEVELAND, OHIO
3 HP, 220/440V, 3 FASES, CONECTADO
A 220V, MARCA LINCOLN
BALEROS NUEVOS
MEDIDAS: 27” FRENTE X 20” FONDO X
29” ALTO
ENTRADA REDONDA: 5”
SALIDA CUADRADA: 4” X 4”
VOLUME CFM: 285
AMXmachinery
CANTEADORA 8"
PARTE # SIL-DC-WJ8 - CANTEADORA DE 8" - 2 HP NUEVA CON GARANTIAMOTOR: 2 HP, 110/220V, 60 Hz, MONOFASICOANCHO MAXIMO DE DESBASTE: 8"MAX. PROFUNDIDAD DE CORTE: 8" X 1/8"; 4" X 1/4" Y 2" X 1/2"INCLINACION DE LA GUIA: 45 Y 90 GRADOSDIMENSIONES DE LA MESA ENTRADA: 23-1/4" X 9-1/4"DIMENSIONES DE LA MESA SALIDA: 27-3/8" X 9-1/2"DIMENSIONES DE LA GUIA: 34" X 4"ALTURA DE LA MESA: 32"CANTIDAD DE CUCHILLAS: 3 PIEZASPESO: 138 KGSTIPO DE EMPAQUE: 1 CAJA
AMXmachinery
PART: 1AM-010-G - PALLET DISMANTLER - GASOLINE MOTOR 13 HP - HEAVY DUTY
PART: 1AM-010-G - PALLET DISMANTLER - GASOLINE MOTOR 13 HP - HEAVY DUTYNew with warranty – 6-month warranty on manufacturing defects on mechanical parts onlyGasoline motor 13 HPBand saw 228” long x 1-1/4” wideTable dimensions: 60” width x 48” depthMaximum size pallet to dismantle: 60” wide x any lengthVideo: https://vimeo.com/797821377Optional: Honda gasoline motorFor more information & specifications contact us
AMXmachinery
PARTE: 12430 - SISTEMA FINGER JOINT - WEINIG GRECON
PARTE: 12430 - SISTEMA FINGER JOINT - WEINIG GRECON
USADO
- MUY BUENAS CONDICIONESWEINIG GRECONMOD. PROFI JOINT- min/max length of raw
material 150-700 mm- min/max working
thickness 20– 50 mm- min/max working width
35 - 170 mm- min/max final working
length 2250 mm - 4500 mm- type Cola Pvac - Complete with 1 knife
set- Volt. 400/50- year 2012- reconditioned by
Weinig Service in 2022
- CE RULES