Identificador: 2626
Abierta
ID de articulo : # 2626 se ha agregado a su lista de deseos.
Descripción
PARTE: 12596 - TRITURADORA - BLOAPCO - MODELO 7-6
USADO – BUENAS CONDICIONES - RECONSTRUIDO
Max trim width 7.5"
Shear Cutting Action
Rotor Speed 500 to 3,600 RPM
Model 7-6 provides cutting via one stationary bed knife and two rotating knives provides two cuts per revolution.
The open-rotor design facilitates free passage of air and material.
Shear-cut action for paper and tough, thin film and foil.
Total weight is 135 pounds
17"L x 13.25W x 22.5H
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
LIJADORA DE TAMBORLIJADORA DE TAMBOR – 2 RODILLOS – 37” ANCHO - SUPER SANDER – 2 RODILLOS – 37” ANCHO - SUPER SANDER
PARTE # 11869 – LIJADORA DE TAMBOR – 2 RODILLOS – 37” ANCHO - SUPER SANDEREn buenas condicionesRodillos 100 cm de largoMotor 7.5 HP, 220V, 2 fasesMotor alimentador 1 HP, 220V, 2 fasesRPM 1760
AMXmachinery
SIERRA VERTICAL ELCON ESPECIAL 1
ELCON 320 DSX-E TO CUT THROUGHT 0-135 MM AUMINUMA vertical panel saw can be used to cut through various materials, like wood based,plastics, composites etc.This episode's custom built Elcon panel saw was developed to cut through aluminium tailgate / cargolift. A bar code scanner tells the machine to cut off the left and left and right side. The sawing speed is automatically adjusted to the thickness of the material, in this case up to 135mm!
AMXmachinery
2AA-H550EII – SIERRA CINTA – CAPACIDAD 21.6”
PARTE: 2AA-H550EII – SIERRA CINTA –
CAPACIDAD 21.6” – AMADA
NUEVA CON GARANTIA
Machine
Specifications
Cutting
Capacity Round (Diameter) 7.87"-18.90"
Rectangle
(W x H) 21.65" x 18.90"
Work
Load Capacity 4,409 lbs.
Saw
Blade Dimensions (L x T x W) 16' x 0.050" x 1.5"
Blade
Speed Inverter Blade Speed Control
Saw
Blade Motor 7.5 HP
Hydraulic
Pump Motor 2 HP
Cutting
Fluid Pump Motor 1/2 HP
Voltage
Required*
AC220V±10%,
3 PH, 60 Hz
*All
Oth...
AMXmachinery
LIJADORA DE BANDA ANCHA – 36” ANCHO – 1 BANDA – TIMESAVERS
PARTE: 12219 – LIJADORA DE BANDA ANCHA
– 36” ANCHO – 1 BANDA – TIMESAVERS
USADA – BUENAS CONDICIONES
0
to 8" thickness capacity, (manually adjusted via handwheel)
20
HP, 230/60/3 combination 4" diam. drum & platen sanding head
(60
- 65) durometer rubber covered contact drum
1
HP, 230/60/3 feed conveyor motor
(15
to 45 ft/min.) variable conveyor feed via variable speed pulley
24"
infeed & 8" outfeed conveyor, (4 jack screws for raise & lower)
Automatic
...