Identificador: 2578
Abierta
ID de articulo : # 2578 se ha agregado a su lista de deseos.
.PNG)
.PNG)
.PNG)
.PNG)
Descripción
CORTADORA MECANICA 8' x 10 Ga PARTE: 2GM-EPS-0810M
- ISO 9001 certified
- American design and Taiwan quality machine
- HD all steel construction for maximum rigidity
- Precision driven gearbox
- Full length 30 strokes per minute
- 60” long squaring arm with inch / mm scale
- spring hold-downs
- high grade carbon/chrome alloy steel blades and hardened to 62 hrc,
2-edge indexable upper blade and 4-edge indexable bottom blade
- Full length with full view finger guard
- Front supports and (2) side gauges
- Safety type foot pedal control
- Jog, single continuous auto operation modes
- 6” manual back gauge with one side handwheel
- 60” long squaring arm with inch / mm scale, mounted on right side of the table
- 2 each 24” front support arms
- full length finger guard
- Removable safety foot pedal control
- One set of upper & lower blades
Cutting Capacity Mild Steel - HRS (tensile 60,000 PSI) Stainless Steel (tensile 85,000 PSI) Soft Aluminum (tensile 28,000 PSI) min. thickness |
8' x 10Ga. 8' x 14Ga. 8' x 1/4" 22Ga. |
| Blade Lenght | 98" |
| Strokes per minute | 26 |
| Worktable height | 32" |
| Front support arm | 36" |
Back gauge | 26" Manual Back gauge |
Blade Rake Angle | 2.5 Degree |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery1
TALADRO MULTIPLE - SISTEMA 29
PARTE: 2JG-MAG-SYSTEM29 - TALADRO MULTIPLE - SISTEMA 29Provides a 29 spindle 32 mm universal drilling solution, with horizontal and vertical boring capabilities and pneumatic tilting of the boring unit with locking points from 0 to 90 degrees for quick set-up at any angle.Accurate positioning of the boring unit to the table with digital readout.0 to 2.5" adjustable drilling depth with patented spiral setting device.(3) patented quick release material clamps with auto-setting to firmly hold ...
AMXmachinery1
ALIMENTADOR - REASERRADORA
PARTE: 2CK-AF19NIs designed to allow consistent and automated feeding of material through vertical bandsaw or resaws. Is pneumatically actuated by a switch in the fence so no foot pedal is required making for a simple and convenient operation. With 10 feed speeds to choose from you can dial in the optimum feed speed for your material. Intended to be fit on bandsaws which are over 24” but could be fitted on smaller bandsaw tables, but may require an extension off the side of your bandsaw ...
AMXmachinery1
CEPILLO 2 CARAS 40"
CEPILLO 2 CARAS 40" 2CK-GTM1020WHas a robust cast-iron body for industrial planing day in and day out. The spiral insert knife cutterheads produce a smooth planed finish with maximum stock removal. The material is passed over the bottom head with a spring-loaded pin feed system while the infeed bed is adjustable to determine how much material is removed. The final thickness is keyed in the digital control and the top head & feed assembly automatically move in place. This wide plane...
AMXmachinery1
SIERRA DE VAIVEN - 200 MM
PARTE: 2CK-FR-200 - SIERRA DE VAIVENFEED ROLLS & PRESSURE ROLLSBottom Rolls – 7 pieces in Front Section & 5 pieces in Rear SectionTop Front section is equipped with 7 pressure rollers & 3 air cylinders controlled by sensorTop Rear section is equipped with 5 pressure rollers & 1 air cylinder controlled by sensor
Motor
20 HP +1/2 HP + 5kW(Servo) + 2HP
Blower
Max.
Working Thickness
200 mm
Min.
Working Thickness
...