Identificador: 2572
Abierta
ID de articulo : # 2572 se ha agregado a su lista de deseos.
.PNG)
Descripción
TORNO 32 x 80'' PARTE: 2GM-GML-3280
Heavy Duty Precision Gap Bed Lathe 32” x 80” 4-1/8” bore, 15HP Motor.
- ISO 9001 certified
- Large spindle bore 4-1/8”
- 4-way rapid traverse on Longitudinal and cross ways
- All dual inch/metric dials.
- solid cast iron machine base
- Heavy Duty main motor 15 HP
- 12 spindle speeds from 25-1,600 rpm
- 54 kinds of inch threads and metric threads
- Threading and feeding rate change by levers
- Spindle is balanced, hardened and precision ground
- Spindle is supported at 3-point by high precision bearings
- All gears and shafts are hardened and precision ground
- Guideways induction hardened and precision ground
- Automatic lubrication system in headstock and feed box
- Tools box with leveling pads
Max. swing over bed | 32” |
Max. length of workpiece | 80” |
Max. swing over cross slide | 22-7/16” |
Max. Swing in gap | 40-1/2” |
Width of Bed | 16” |
Effective length in gap to spindle | 10” |
Effective length in gap to chuck jaws | 7” |
Spindle bore | 4-1/8” , D1-8 |
Taper of spindle center | MT#5 with1:20 reducing sleeve |
Spindle speeds | 25-1,600 rpm / 12 steps |
Longitudinal feeds | 0.0016-0.055 IPR, 60 kinds |
Cross feeds | 0.0008-0.027 IPR, 60 kinds |
Inch threads | 80-7/16”TPI, 54kinds |
Metric threads | 0.45-120 mm , 54 kinds |
Module threads | 0.25-60 mm, 46 kinds |
Diameter pitch threads | 60-0.25 DP , 42 kinds |
Max. travel of top slide | 9-1/8” |
Max. travel of cross slide | 16-1/2” |
Longitudinal rapid traverse | 18 ft / min. |
Cross rapid traverse | 8 ft / min. |
Diameter of tailstock quill | 3-1/2” |
Max. travel of tailstock quill | 6” |
Taper of tailstock quill center | M.T. # 5 |
Max. weight of workpiece | 2,000 LBS |
4-way tool post size | 1” x 1” |
Longitudinal leadscrew diameter / pitch | Diameter: 3” Pitch: 2 TPI |
Main Motor | 15 HP, 220V/40A / 440V/20A, 3 phase, prewired on 220V |
Rapid traverse motor | 1/3 HP, 220V/440V, 3 phase, prewired on 220V |
Coolant pump motor | 1/8 HP,220V/440V, 3 phase, prewired on 220V |
Machine weight, approx. | 9,350 LBS |
Overall dimensions, LxWxH | 146” x 48” x 67” |
- Free SINO DRO, installed
- Free Taper turning attachment, , installed
- 12” 3-jaw chuck with top reversible jaws
- 16” 4-jaw chuck
- 20” Face plate
- 10” drive plate
- ¾”-7-1/2” steady rest with roller jaws
- 1”-5” follow rest
- Removable gap
- 4-way tools post
- Chuck guard with safety shut off
- Foot brake
- Halogen Work light
- coolant system
- Full length rear splash
- (2) dead centers and (1) reducing sleeve
- Thread chasing dial
- Tool box and leveling pads
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery1
TROMPO - MOTOR 7.5 HP
PARTE: 2CK-SS512CBIs a ruggedly built shaper with refined features well suited for demanding production environments. Its’ versatile design makes it the ideal shaping solution for edge-profiling, door & furniture components, mouldings, tenoning, and more. The powerful dual direction 7.5HP driven spindle allows for optimum shaping even with large profiles. The heavy-duty cast-iron table and shaping column ensure maximum stability with superior vibration damping for optimum finish quality....
-500x500.jpg)
AMXmachinery1
CEPILLO 1 CARA - 24 PULGADAS
PARTE: 2CK-P24HVHas a cast iron table and head assembly with robust welded steel frame results in superior planing finish due to greatly reduced vibration. The spiral insert knife cutterhead runs extremely quiet and the solid carbide inserts provide a smooth finish and have a long life. When one edge gets dull simply rotate the knife 90 degrees for a new cutting edge. Knives can be rotated four times before needing to be replaced.Spiral Insert Knife Cutterhead with replaceable carbide inse...
AMXmachinery1
ASTILLADORA - HORIZONTAL - 15 PULGADAS
PARTE: 2TA-WG-1502H - ASTILLADORA - HORIZONTAL - 15 PULGADASFeatures:A specially designed, powerful crusher for different materials such as wood, MDF, particle board,plastic, rubber, corn cob, etc.Excellent wearing ability and impact-resistant for time & labor saving.Large busting capacity and easy feeding system.The shaft rest for the cutter head is constructed by round hollow with special angle to keep cooling for long hours' usageCutter head angle cutting design allows aggressive cutting...
AMXmachinery1
LIJADORA DE BANDA ANCHA - ARRIBA Y ABAJO
PARTE: 2CK-SU/SBIs designed for in-line or stand-alone operations. Suitable for double-sided processing solid wood or sealer sanding applications is built to exacting standards to sand multiple surfaces generally in one pass to achieve outstanding results with maximum efficiency. Is available with multiple configurations with 1-4 sanding units and widths of 24”, 36”, 43”, and 51”. Sanding units can be rubber or steel contact drums, combination sanding units (drum/platen), or wire brush h...