Identificador: 2564
Abierta
ID de articulo : # 2564 se ha agregado a su lista de deseos.
.PNG)
.PNG)
.PNG)
Descripción
PRENSA CNC 70 TONELADAS 6' PARTE: 2GM-HPB-7006CNC-3R
Our 70 ton press brake are equipped with a three axis ESA Control. This is a Taiwan quality machine, designed in the USA. With it's rugged steel framework, quality hydraulic and electronic components, makes this press brake a great addition to any shop.
- ISO 9001 certified
- Meet OSHA and CE safety standard
- ESA (Italy) Model 630, 3 Axis CNC Controller
- Die library, offline programming, stores thousands of programs
- Programmable Angle/ Angle Correct
- 10” Touch screen
- 3 Axis CNC Graphic Controller
- Y axis Ram with high precision linear encoder
- X servo Back gauge
- R programmable Back gauge height
- Line by line coding
- 2D Graphic Drawing Mode
- Bend Sequence Optimization for collision detection
- Spread Length Calculation
- Germany Rexroth hydraulic system
- Yaskawa Servo motor and Drives
- Schneider electrical components
- All steel construction for maximum rigidity
- Hydraulic logic system centrally located and quiet
- Safety type foot pedal with handle and E-stop switch
- Safety 24V low voltage & overload protection
- One year industrial warranty for parts
- ESA (Italy) Model 630, 3 Axis CNC Controller
- (2) 24” front support arms, Quick Release for easy positioning
- Quick release segmented (American Style Tooling) punch holder
- Full Length Gooseneck Punch HRC 50 ( Punch is rated for 10 gauge and lighter .062” radius punch) Additional Tooling may be required for thicker materials and purchaser’s specific products/parts - Ask your dealer for custom tooling quotes)
- Full Length Vee Die with 6 assorted sizes HRC 50
- Lntech Light Curtain System
- Side and Back Safety Fence
- Movable Foot Pedal with Estop meet OSHA safety standard
| Maximum Pressure | 70 Tons |
| Bending Lenght Capacity | 80" (6'8") |
| Distance Between Uprights (housing) | 63" |
Ram Stroke Travel Cylinder Travel Adjustment (max) | 6" 3 1/8" |
| Table Width | 6" |
Distance Between Table and Ram Max Stacked Tooling Height | 15 1/4" 8-1/2" |
| Throat Depth | 10" |
| Back Gauge Distance | 24" |
| Back Gauge Repeatability | .0039" |
| Y-Axis Repeatability | .0039" |
Approach speed, inch / second Working speed, inch / second Return speed, inch / second | 3.14” 0.35” 2.36” |
Main motor:
Servo motor for back gauge:
Servo motor for bending angle setting
|
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
-500x500.png)
AMXmachinery1
DOBLADORA DE METAL 6' X 10 GA
DOBLADORA DE METAL 6' X 10 GA PARTE: 2GM-0610EThis machine has a 4HP Motor, rated at 220V three phase. Power bending roll up/down with push button & display.SO 9001 certifiedTaiwan machinesAll (3) rolls are hardened rolls, up to 50-52 HRC3-rollers are driven to perform high accuracyAdjustable cone attachment included3/8”, ½” and 5/8” grooves on rollersOne wheel one-side operated for bending rollOne wheel one-site operated for pinch roll (E model...
-500x500.jpg)
AMXmachinery1
PARTE: 2TA-GS-60RO2 - ENGOMADORA 2 LADOS – CAPACIDAD ANCHO 60”
PARTE: 2TA-GS-60RO2 - ENGOMADORA 2 LADOS – CAPACIDAD ANCHO 60”
Nueva con garantíaRoller coaster type are efficiently & effectively apply glues with a minimum of setup and easily maintained.Set of three rolls (one doctor roller) for top-only or four rollers (two doctor roller) for top and bottom glue application.We designed our glue spreaders with high quality grooved rubber glue rollers with hardened rubber doctor rolls for durability usage.Stainless drip pan catches the over spread glue...
AMXmachinery1
REBAJADORA DE CAJONES
PARTE: 2CK-JEN60Designed to both notch and drill drawer boxes to install undermount soft-close drawer slides. The operation of the machine is simple with a self-indexing drilling unit that’s determined by the position of the drawer for either left or right notching. With a cycle time of approximately 10 seconds per drawer, you can achieve a high throughput and save time for other important tasks.High production capacity of up to 220 drawers machined per hour.57mm (2 ¼”) wide cutter head...
AMXmachinery1
ROUTER DE PEDESTAL - 7.5 HP
PARTE: 2CK-SR750Is the ideal solution for high volume routing and profiling of repetitive shapes. With its powerful 7.5 HP router which turns at an RPM of 10000 or 20000 RPM you can cut through solid wood or panel products with ease. Simply follow your profile with one of the guide pins included (1/4”, 3/8”, ½”) for fast and convenient routing operation. The machine is constructed with a solid welded steel frame and cast-iron tilting table. The large solid table is fitted with a s...