Identificador: 2543
Abierta
ID de articulo : # 2543 se ha agregado a su lista de deseos.
.PNG)
Descripción
FINGER JOINT AUTOMATICA PARTE: 2CK-FL03
Is a cutting-edge fully automatic finger jointing production line, designed to efficiently convert wood waste into valuable materials while maintaining an excellent performance-to-cost ratio. With its innovative technology, this system offers remarkable value in terms of both performance and price, the entire machining procedures from workpiece in-feed, left and right shaping to jointing is fast, smooth and accurate. The whole production line is carefully designed and built for maximum dependability year after year, making it a continuous game-changer in the wood industry.
- Excellent performance-to-cost ratio
- Only two operators required for maximum production
- Injection type gluing system
- Standard: PVAc glue – Tooling for PU, MUF, EPI, etc. glues available upon request
- Length of cut is calculated by an encoder and set on a touch screen for increased accuracy
- Servo motor capable of provides a production rate of up to 5~6 cycles/min
- Three initial infeed tables lead to a fully automatic operation from feed to pre-press assembly stand
- F-C05 and F-C06 finger shapers perform automatic scoring, trimming, shaping, and gluing
- F-D01 enables automated workpiece feeding, aided by a steel brush roller that gently flips materials one by one into the pre-press assembly stand
- With the choice of 10 feet or 20 feet in length the F-T03/F-T05 chain type pre-press ensures accurate vertical and horizontal alignment before workpiece is cut to length
- Synchronized jointing and cutting is performed in a 2-step process within the F-A03 assembly press by employing two hydraulic cylinders at the front and rear to provide an extremely consistent joint
Includes the following:
F-I01 Multi-Stage (Three) Initial Conveyor Tables
Auto Feeding Table | 650 mm (25.6“) |
Brush Wheel Drive Motor | 1 HP x3 |
Machine Dimension (L x W x H) | 3190 x 870 x 970 mm (126 x 35 x 39”) |
Packing Dimension (L x W x H) | 3300 x 970 x 1070 mm (130 x 35 x 43”) |
F-C05 Automatic Finger Shaper – Right End
Max. available width working table | 650 mm (25.6”) |
Range of workpiece length | 150~1000 mm (5.9~39.4”) |
Range of workpiece height | 30~160 mm (1.2~6.3”) |
Table moving speed | 66 FPM |
Trimming saw speed | 2800 RPM, 3400 RPM |
Finger cutter speed | 5000 RPM |
Scoring saw speed | 2800 RPM, 3400 RPM |
POWER REQUIRED | |
Table-drive motor | 1/2 HP |
For conveyor motor | 1/2 HP |
Scoring saw motor | 1 HP |
Trim saw motor | 10 HP |
Shaper cutter motor | 20 HP |
Dia of Cutter (in/out) | ø70 / ø160 mm (ø2.8 / ø6.3) |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery1
PARTE: 4NE-MAESTRO - CENTRO DE MAQUINADO CNC - 5 AXIS - MAESTRO
PARTE: 4NE-MAESTRO - CENTRO DE MAQUINADO CNC - 5 AXIS - MAESTROControl Unit: TPA Control UnitX AXIS - 1100 MMY AXIS - 1300 MM
Z AXIS - 700 MM• Y1/ Y2 Axis Motor: 1.5 kw Rack and Pinon• X Axis Motor: 1.5 kw Rack and Pinon• Z Axis Motor: 3 kw Ball Screw with break• Reductor: Liming FE Series• Spindle Motor: ML-1C 7.5/12 24 ER32 CROSS 2+2 ENDS• Vacuum System: Backer Vacuum 250 M^3• Oiling System: ILC Self Lubrication System• Machine Dimension: Length: mm * Width: mm * Height:...
AMXmachinery1
PARTE: 12461-1 - EXTRACTOR CENTRIFUGO - DE AIRE - DE COCINA INDUSTRIAL – ALUMINIO
2 EXTRACTORES IGUALES EN EXISTENCIA
PARTE: 12461-1 - EXTRACTOR CENTRIFUGO - DE AIRE - DE
COCINA INDUSTRIAL – ALUMINIO
PARTE: 12461-2 - EXTRACTOR CENTRIFUGO - DE AIRE - DE
COCINA INDUSTRIAL – ALUMINIO
USADO – MUY BUENAS CONDICIONES
MARCA: DAYTON ELECTRIC
MODELO: 4HX98B
Base 34” X 34”
Diámetro total: 42”
Altura total: 36”
Baleros nuevos Motor y Extractor
Motor 1.5 HP, 115/230V, 1 Fase, RPM
1,725, AMP 18/9, marca BALDOR, actualmente conectado a 115VVi...
-500x500.jpg)
AMXmachinery1
ROUTER DE PEDESTAL
ROUTER DE PEDESTAL 2CK-DR750Is the ideal solution for high volume routing and profiling of repetitive shapes. With its powerful 7.5 HP router which turns at an RPM of 10000 or 20000 RPM you can cut through solid wood or panel products with ease. Simply follow your profile with one of the guide pins included (1/4”, 3/8”, ½”) for fast and convenient routing operation. The machine is constructed with a solid welded steel frame and cast-iron tilting table. The large s...
AMXmachinery1
SIERRA DE BANCO - 10 PULGADAS 3HP
PARTE: 2CK-TA10Is for serious woodworkers and production shops that require an industrial strength and powerful table saw. The large precision-ground & polished cast-iron table and cast-iron saw unit ensure vibration free cutting with optimum cut quality. The quick setting T-square rip fence is equipped with dual inch & metric scales for precise rip cutting. The blade guard is mounted to a splitter with anti-kickback pawls for safe operation. Comes standard with both standard and dado arbo...