Identificador: 2530
Abierta
ID de articulo : # 2530 se ha agregado a su lista de deseos.
.PNG)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
Descripción
CANTEADORA AUTOMATICA PARTE: 2CK-MX340M
Is an entry level edgebander with the perfect blend of quality and affordability. With fine attention to detail and quality componentry can output high quality edges on cabinet parts and more. This machine is equipped with end trimming, flush trimming, PVC scraping, and buffing. User friendly controls and adjustments allow for efficient changeovers of edge tape thicknesses between 0.4mm & 3mm.
- Compact design makes it the ideal edgebanding solution for small workshops
- Precise adjustments for optimum edge quality
- Chain feed system ensures consistent feeding of material for consistent results
- Available in 230V 1 or 3 phase
- PLC control system with LED display and keypad
- Workpiece is fed by chain
- Edge coil support plate: Ø 800 mm (31.5″), for PVC/ABS
- Automatic edge feeding with a thickness capacity of 0.4-3 mm;
- Coiled edge bands up to 3 mm in thickness in Hard-PVC/ABS are cut with guillotine shears.
- 1.2 kg (2.64 lb) Teflon-coated hot-melt glue pot
- Spring loaded pressure unit with (2) pressure rollers (1 chrome & 1 rubber)
- Heavy duty pressure beam with extendable work-piece support
- Heated infeed fence for pre-heating the panel for optimum glue penetration
- Mechanical digital readouts for convenient and quick adjustment to the working units & thickness
- END TRIM
8800 RPM dual saw blade (80mm / 3.15″) end trimming unit - TOP & BOTTOM TRIM
10500 RPM top & bottom trimmers with insert knife cutters for radius trimming & bevel trimming - RADIUS SCRAPING
Radius scraper with 2mm radius knives can be easily excluded when not required - BUFFING
2800 RPM top & bottom buffing units to polish the machined edge
INCH | METRIC | |
Feeding speed | 23 FPM | 7 m/min. |
Panel thickness | 0.472~1.77″ | 12~45 mm |
Edge thickness | 0.0158″~0.118″ | 0.4 ~ 3 mm |
Minimum panel width | 3 ½” | 90 mm |
Minimum panel length | 3 ½” | 90 mm |
Working table height | 33.5″ | 850 mm |
Dust collection outlet dia. | 2 x 4″ | 2 x 100 mm |
Total connected power | 5 HP | 3.8 KW |
Air | 7.06 CFM / 85 – 100 PSI | 200 litres/min / 6 – 7 kg/cm2 |
Max. machine dimensions (LxWXH) | 115″ x 47″ x 48″ | 2921 x 1194 x 1220mm |
Machine weight | 968 lbs. | 440 kgs. |
Shipping dimensions (LxWxH) | 89″ x 29″ x 50″ | 2261 x 737 x 1270mm |
Shipping weight | 1115 lbs. | 507 kgs. |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery1
ENCHAPADORA DE CANTOS
PARTE: 2CK-MX350Is a compact edgebander capable of applying up to 3mm thick edge tape on cabinet parts and more. The counter rotating pre-milling cutters ensure optimum panel edge quality and squareness which result in a less visible glue joint. It comes equipped with high frequency motors on both the end trim and top & bottom trim. In addition it is equipped with PVC radius scraping and buffing units. User friendly controls and adjustments allow for efficient changeovers of edge tape th...
-500x500.png)
AMXmachinery1
TORNO 32 x 120''
TORNO 32 x 120'' PARTE: 2GM-GML-32120Heavy Duty Precision Gap Bed Lathe 32” x 120” 4-1/8” bore, 15HP Motor.ISO 9001 certifiedLarge spindle bore 4-1/8”4-way rapid traverse on Longitudinal and cross waysAll dual inch/metric dials. solid cast iron machine baseHeavy Duty main motor 15 HP12 spindle speeds from 25-1,600 rpm54 kinds of inch threads and metric threadsThreading and feeding rate change by leversSpindle is balanced, hardened and precision groundSpindle is supported a...
-500x500.png)
AMXmachinery1
CORTADORA DE METAL HIDRAULICA
CORTADORA DE METAL HIDRAULICA PARTE: 2GM-HS-1014MDTaiwan machinesISO 9001 certifiedHD all steel construction for maximum rigidityGerman logic quiet Rexroth hydraulic systemAdjustable stroke from 16-20 strokes per minute60” long squaring arm with inch / mm scaleSpring hold-downsHigh grade carbon/chrome alloy steel blades and hardened to 62 hrc,2-edge indexable upper blade and 2-edge indexable bottom bladeFull length with full view finger guardFront supports and (2) side g...
AMXmachinery1
LIJADORA DE BANDA VERTICAL - 6 PULGADAS
PARTE: 2CK-CT108Has a 6” x 108” long belt with 39” wide platen for straight edge sanding and 3” drum for curve sanding. Table are adjustable up and down and can be angled for full belt utilization. This is the ideal edge sander for sanding cabinet door edges, furniture components, and more.Large front table can be tilted and adjusted in height to utilize the full width of the sanding beltSide table is supplied for sanding curved components and can be adjusted in heightRugged heavy gaug...