Identificador: 2524
Abierta
ID de articulo : # 2524 se ha agregado a su lista de deseos.
.PNG)
.PNG)
.PNG)
Descripción
TALADRADORA HORIZONTAL PARTE: 2CK-BM301
With its two spindle drilling head with adjustable drill centers from 0.71”~3.93” centers (18~100mm), you can conveniently drill dowel hoes with ease. The drilling assembly and table are made from cast iron for maximum rigidity and durability. The unit is mounted to a fabricated steel base for optimal functionality. The drilling cycle is controlled by a pneumatic cylinder and is actuated by a foot pedal for operator convenience. The drilling speed is adjustable for optimal cycle speeds. The drilling head is driven by a powerful 2HP direct drive motor. A pneumatic clamp ensures the work piece is held firmly during drilling operations.
- Automatic pneumatic drilling cycle actuated by convenient foot pedal
- Pneumatic clamp holds material firmly in place during drilling cycle
- Adjustable drilling bit center to center spacing from: 71”~3.93” centers (18~100mm)
- Industrial cast iron drilling assembly & table, with fabricated steel base
- Cast iron worktable with miter gauge for angled holes
- Worktable is conveniently adjusted up & down for varying workpiece thicknesses by an adjustment knob and threaded rod
- Adjustable drilling depth with maximum stroke of 4” (100mm)
- Drilling speed can be conveniently adjusted by a speed adjustment knob.
- Powerful 2HP direct drive motor for effortless drilling
INCH | METRIC | |
Number of drills | 2 spindles | |
Adjustable drill spacing | 0.71”~3.93” centers | 18~100mm centers |
Maximum drill stroke | 4” | 100mm |
Drill bit shank | 7/16”-14 Threaded Shank (Both Right Hand Only) | |
Table size | 15.75” x 10” | 400 x 250mm |
Motor | 2HP (230/3/60 = 6.3 amps) | |
Spindle speed | 3450 RPM | |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery1
CANTEADORA
CANTEADORA PARTE: 2CK-RAPIDEDGE PROCan apply edge banding to your projects in record time, without sacrificing quality or accuracy. Rapidly change over from various edge thicknesses and finishes right from the control panel. Its compact size and easy-to-maneuver design make the RapidEdge Pro the ideal edgebanding solution for use in any workshop or manufacturing setting.Rapid application: Can apply different thickness of edge band from 0.5mm to 3mm to your pr...
AMXmachinery1
PARTE: 2CK-FL-08 - SISTEMA FINGER JOINT - AUTOMATICO
PARTE: 2CK-FL-08 - SISTEMA FINGER JOINT - AUTOMATICOAUTO INFEED
TABLE
Length
900mm (35.4”)
Width
600mm (23.6”)
Infeed
Table½ HP (3Ph) x 2
AUTO FINGER SHAPER – LEFT
Table Size
600mm (23.6”)
Length
150~900mm (5.9” ~ 35.4”)
Width
20~60mm (0.78” ~ 2.36”)
Thickness
20~160mm (0.78” ~ 6.3...
-500x500.png)
AMXmachinery1
COLECTOR DE ASERRIN 10 HP
COLECTOR DE ASERRIN 10 HP PARTE: 2CK-DBS10Is a high efficiency indoor dust collectors generating up to 5000 CFM and are available in 10HP or 15HP. Equipped with a low RPM (1750 RPM) blower is designed to run much quieter than other high RPM units. The 1-micron filter bags ensure optimum air filtration and can be manually shaken to for cleaning. The large 168 gallon self dumping collection bin comes on casters and can be conveniently lifted by a fork lift and tilted to dump t...
AMXmachinery1
LIJADORA DE MOLDURAS - OSCILANTE
PARTE: 2CK-E6Can effectively sand the edges of solid wood or MDF cabinet doors, furniture parts, and stair treads to prepare it for finishing and between coats. The adjustable RPM provides you with full control of the sanding speed for optimum finishing results. The head oscillates up and down and is manually adjustable to utilize the full width of the abrasive. The sanding strips can be exchanged quickly to change between various grits. The back fence can be utilized for straight sandin...