Identificador: 2508
Abierta
ID de articulo : # 2508 se ha agregado a su lista de deseos.
Descripción
PARTE: 12581 – CHAFLANADORA - HAZELTHORN
USADA – BUENAS CONDICIONES
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
TROMPO COPIADOR 28" MESA ROTATIVA
PARTE # 2TA-CS-0028 - TROMPO COPIADOR 28" - MESA ROTATIVA - AUTOMATICOCaracteristicas: - All operation controls are concentrated in the control box, and the controls are well arranged on the control panel for easier touch up to operation.- Equipped with PC program control for easy maintance and durability usage.- The easy set up at any position, 2 variable speeds table turning makes it possible for the machine to be operated at any cutting speed up to maximum.- The variable cutting feed rate ...
AMXmachinery
PARTE: 3CH-XBJ-500 - BRIQUETEADORA DE METAL – VERTICAL – HIDRAULICA – 1000 KG/HR
PARTE: 3CH-XBJ-500 - BRIQUETEADORA DE METAL – VERTICAL – HIDRAULICA – 1000 KG/HRNueva con garantíaAlimentación automáticaLas briqueteadoras de metal pueden compactar diferentes clases de materiales como hierro fundido, aluminio, cobre, magnesio, titanio, molibdeno, metal, etc., en bloques de alta densidad sin aditivos.Specifications:Main cylinder: Nominal force 500 kNFeed cylinder: Nominal force 250 kN Block cylinder: Nominal force 500 kNBriquette size: 120 mmBriquette density: Steel...
AMXmachinery
PARTE: 12597 - TRITURADORA - BLOAPCO - MODELO 7-6
PARTE: 12597 - TRITURADORA - BLOAPCO - MODELO 7-6USADO – BUENAS CONDICIONES - RECONSTRUIDOMax trim width 7.5"Shear Cutting ActionRotor Speed 500 to 3,600 rpm1 HP motorModel 7-6 provides cutting via one stationary bed knife and two rotating knives provides two cuts per revolution. The open-rotor design facilitates free passage of air and material. Shear-cut action for paper and tough, thin film and foil. Total weight is 135 pounds17"L x 13.25W x 22.5H
AMXmachinery
CEPILLO 2 CARAS - ANCHO 24” - CANTEK
PARTE:
12408 - CEPILLO 2 CARAS - ANCHO 24” - CANTEK
USADO - EN BUENAS
CONDICIONES
Top cutterhead motor 30 HP 460 volts Helical cutterhead
Bottom cutterhead motor 25 HP 460 volts straight knife
cutterhead
Feed motor 5 HP on spike carpet feed system 25 to 95 fpm
Digital control panel
Capacity 3/8” to 6-1/2” thickness
Max lumber width 24”
Min lumber length 15”