Identificador: 250
Abierta
ID de articulo : # 250 se ha agregado a su lista de deseos.
Descripción
PARTE # 12WG-UNIMAT 217 - MOLDURADORA - 5 CABEZALES
MOLDURADORA AUTOMATICA
5 CABEZALES
CARACTERISTICAS GENERALES:
KW (HP) rpm Tool cutting circle
1 - 7,5 (10) with Electronic Brake 6000 5“ – 5-11/16“
2 - 11 (15) with Electronic Brake 6000 5“ – 7-7/8“
3 - Joint Motor together with Right 6000 5“ – 7-7/8“
4 - 11 (15) with Electronic Brake 6000 5“ – 7-7/8“
5 - 7.5 (10) with Electronic Brake 6000 5“ – 7-7/8“
Tool arrangement BRLTB
Working width 3/4“ – 9“
Working height 5/16“ – 4-3/4“
(with tool cutting circle 5”)
Feed Speed-variable with inverter 20 – 100 feet per minute
DigiSet (double mechanical readouts) for left and top radial
adjustments. One readout is for the tool size and the other for the
finished wood dimension.
Five feed roller shafts in standard
One driven steel rollers in the machine table
One driven roller in the out-feed table
Axial setting range of feed roller opposite the left tool holder 1 3/8”.
Extended feed roller shaft opposite the left tool holder 6”.
Axial setting range of vertical spindle 3 -1/8 in.
Axial setting range of horizontal spindle 1 -3/4 in.
(1st bottom 3/16 in.)
All spindles diameter 1 - 1/2"
Mechanical readouts on top spindle chip-breaker and pressure shoe.
5 Additional set of spacing collars, clamping length 6-11/16”,
diameter 1-1/2"
Operating voltage- 3 phase, 460 Volt, 60 Cycles
according to US regulations
Straightening table, 6-1/2 ft
(incl. edge jointing fence)
Machine table and fences chromium-plated (excluding infeed table and special table plates)
Electric height adjustment of the feed
Central position of lubrication points at the front side of the machine
One interior light in the safety hood
The Illustrations in this offer can include special equipment, which do
not belong to the range of your offer.
The offer is made pursuant to our General Standard Terms and Conditions.
Safety and Noise Protection:
Electromagnetic interlocking of the safety hood (the hood may be
opened only after the spindles come to a complete stop,
(which is approximately 15 seconds with the “Smart” Spindle Brakes)
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 1AM-1150-G – RESACADORA PARA TARIMAS – 4 CUCHILLAS – RESAQUE 9” LARGO - USO RUDO - INDUSTRIAL - MOTOR GASOLINA
PARTE: 1AM-1150-G – RESACADORA PARA TARIMAS – 4
CUCHILLAS – RESAQUE 9” LARGO - USO RUDO - INDUSTRIAL - MOTOR GASOLINANueva con garantía – 6 meses
sobre defectos de fabricación en partes mecánicasMotor Gasolina 13 HP
Resaque máximo 9” largo x 2-1/2”
alto x 1-5/8” profundidad400 a 800 cortes/hr aprox.Largo de palos mínimo 30”, no
máximoCabezal con 4 cuchillas rectas de HSS acero de alta velocidadCabezal y Cuchillas de
Importación – La más Alta Calidad
...
AMXmachinery
FINGER JOINT GRECON TURBO
PARTE # 11770 – SISTEMA FINGER JOINT – GRECON TURBOEn buenas condiciones de operaciónManufactura: 2000Technical designPackage systemHorizontal jointVertical joint Number of milling units: 2Workpiece width max mm: 205Workpiece thickness max mm: 80Infeed length max mm: 1.000Infeed length min mm: 150Package width mm: 600Pressing length mm: 6.100Total pressure kg: 12.000Capacity m/ shift: 16.000Capacity of router cycles/min: 6,5Transfer capacity parts/min: 120Capacity of press cycles/min: 7Loa...
AMXmachinery
DEBARKER CAMBIO 30”
PARTE # 11606 - DEBARKER – SODERHAMN/KOCKUMS - CAMBIO RING 30”EN BUENAS CONDICIONES DE OPERACIONSimple band style ring tensionHydraulic powered feed rolls
AMXmachinery
PARTE: 12643 - MOLDURADORA - 5 CABEZALES - DIEHL
PARTE: 12643 - MOLDURADORA
- 5 CABEZALES - DIEHL
USADA - BUENAS
CONDICIONESTABLERO ELECT.
4405 motores con
cabezales y acentadoresTuberia de extracciónRodillo de alimentación
Mesa de recepción
y carro para tiras molduradas o cepilladas