Identificador: 2473
Abierta
ID de articulo : # 2473 se ha agregado a su lista de deseos.
Descripción
PARTE: 2CA-RM150 - BASTONERA - CAPACIDAD 1” - 5” DIAMETRO
NUEVA CON GARANTIA
- The unit is designed solely for shaping of round poles in wood working factory.
- The 4-stage speed feeding of square workpiece into cutting position by means of feed rollers may continuously push out shaped round poles in full automatic.
- The cutting head has been proven flawless through experience and study of many years.
- The unite cuts out perfectly round rod or stick, such as flag pole, rattan, acrylic molded board, carbon, bakelite, bamboo and wood.
- A hand wheel is provided to adjust simply the feed rollers.
- Wood fragments and dust are cleared off from the unit thoroughly in coherence with spindles revolution.
- Cutting of each type and size of workpiece will be carried out by specific cutter head and rollers for finished products.
- Automatic feeding, one-piece cast iron base.
- High-efficiency industrial TEFC motor for powerful cutting.
Design and specifications are subject to change without prior notice.
| SPECIFICATIONS | ||
| Motor of Main Cutter | ||
| Feed Motor | ||
| Cutter Speed | ||
| Feed Speed | ||
| Total Knife | ||
| Working Size | ||
| N.W. | ||
| G.W. |
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 12504 - COMPRESOR DE TORNILLO - 250 HP – ATLAS COPCO – 440V
PARTE: 12504 - COMPRESOR DE TORNILLO - 250 HP – ATLAS COPCO
– 440V
2 USADOS – BUENAS CONDICIONES1 USADO - PARA PARTES
AMXmachinery
PARTE: 12135 – LIJADORA BANDA ANCHA – SUPERIOR E INFERIOR – 52” ANCHO - CEMCO
PARTE:
12135 – LIJADORA BANDA ANCHA – SUPERIOR E INFERIOR – 52” ANCHO - CEMCO
USADA – EN BUENAS CONDICIONES
3 head
Top & 3 head bottom Combination Planer Sander
Newman/Whitney
helical cutter heads on station #1, followed by 2 sanding heads on stations #2
and #3, with a live conveyor in between.
Machines
were running when they came out of service and are in dry storage.
They were
new in 1998 and each machine can operate independently.
AMXmachinery
CLAVADORA PARA TARIMAS
PARTE # SIL-DC-AT3092 - CLAVADORA NEUMATICA PARA TARIMASNUEVA CON GARANTIALONGITUD DE CLAVO: DESDE 1-3/4" HASTA 2-3/4"90-110 PSI, 6-8 CFM, 168-220 LTS/MIN
AMXmachinery
ASTILLADORA 7"
PARTE: 2WA-CR70 – ASTILLADORA – MOTOR GASOLINA 38 HP, CAPACIDAD 7” DIAMETRO7" x 12" Slab Style OpeningAuto Engage Fluid CouplerDual Active RollersIntellifeedKohler Gas EngineRotor DiscAngled RotorLedger AdjustmentRapid Recovery Auto ReverseEasy Start Tension ReliefSafety / Control Bar360° Swivel Exit ChuteEasily Accessible Rotor HoodRotor Lockout Safety LeverDouble Banded V-BeltsHighway TiresElectric BrakesTorflex Suspension AxlesSignal LightsLockable Fuel / Storage CompartmentEnclosed Fu...