Identificador: 2426
Abierta
ID de articulo : # 2426 se ha agregado a su lista de deseos.
Descripción
PARTE: 12558 - CENTRO DE MAQUINADO - 2014 HAAS VF-6SS
USADO – MUY BUENAS CONDICIONES
SPECIFICATIONS:
TABLE LENGTH 64"
TABLE WIDTH 28"
TABLE CAPACITY 4,000 lb
X-AXIS TRAVEL 64"
Y-AXIS TRAVEL 32"
Z-AXIS TRAVEL 30"
SPINDLE SPEED 10,000 RPM
SPINDLE MOTOR 30 hp
SPINDLE TAPER CAT 50
TOOL CAPACITY (ATC) 30
ROTARY OR TRUNNION Yes
APPROX MACHINE WEIGHT 22,500 lb
APPROX MACHINE DIMENSIONS 195" X 102" X 130"
EQUIPPED WITH:
HAAS HRT310 ROTARY TABLE
4TH AXIS DRIVE & WIRING
2-SPEED GEARBOX
10,000 RPM SPINDLE
SIDE-MOUNT TOOL CHANGER (30 ATC)
THROUGH-SPINDLE COOLANT
PROGRAMMABLE COOLANT
CHIP AUGER
HIGH-INTENSITY LIGHTING
RIGID TAPPING
USB PORT
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
ESPIGADORA 2 MESAS
PARTE: 2TA-SET-100 - 3YC-YRT-115 - ESPIGADORA - 2 MESAS - AMX MACHINERYNueva con garantiaBuilt with two working tables for high efficiency operations.Table longitudinal traverse is pneumatic operated for smooth cutting.Tenon’s width is easily adjustable by hand wheel.Convenient tenon depth adjustment from outside without removing covers.Table can be tilted to 20 degrees at each side for angular tenon.Cutter moving speed is infinitely adjustable to achive the best results.Pneumatic hold down c...
AMXmachinery
OPTI-CONTROL - WEINIG - OCMS
PARTE: 12382 - OPTI-CONTROL - WEINIG
- OCMS
USADA - BUENAS
CONDICIONESElectronic
Measuring and Indicating SystemMaximum
Measuring Width: 13"Maximum
Tool Diameter: 11-3/4"Electronic
measuring via electronic digital readouts for radial and axial measurementsWired
110V Single Phase
Year:
2003
AMXmachinery
CEPILLO 4 CARAS – 16” ANCHO - MIDA
PARTE:
12283 – CEPILLO 4 CARAS – 16” ANCHO - MIDA
USADO –
MUY BUENAS CONDICIONESYear 2002Motor Power 37,4 kWVoltage 400 V (three-phase)C.E. YesAbres 4Largueur min/max. Travail 420
mmHauteur min/max. Travail 11 -
300 mmLongueur table travail 1000 mmTotal Nº axis 4Bottom horizontal axis Yes 11
kWDrill right axis Yes 6,6 kWDrill left axis Yes 6,6 kWUpper horizontal axis Yes 13,2
kWVitesse d avance 3-30 m/minDiametre rouleaux avancement
90 mmDrag upper number 3Transmission Type Ca...
AMXmachinery
CONTORNEADORA BACCI
PARTE # 10161 – CONTORNEADORA – BACCI PC-STPEn buenas condiciones de operaciónPerfiladora y contorneadora2 cabezales con motores 5.5 HPHidráulica y neumáticaLargo útil de trabajo 1200 mmAvance Hidráulico4 pistones neumáticos