Identificador: 2389
Abierta
.jpg)
Descripción
ROUTER DE PEDESTAL 2CK-DR750
Is the ideal solution for high volume routing and profiling of repetitive shapes. With its powerful 7.5 HP router which turns at an RPM of 10000 or 20000 RPM you can cut through solid wood or panel products with ease. Simply follow your profile with one of the guide pins included (1/4”, 3/8”, ½”) for fast and convenient routing operation. The machine is constructed with a solid welded steel frame and cast-iron tilting table. The large solid table is fitted with a steel fence and the spindle to column clearance is 29.5”. Comes with a convenient foot pedal to actuate the router so you can keep your hands on the template.
- Precision Constructed Spindle Assembly: The massive spindle, which is ground and balanced, is mounted on super precision (GNP4 grade) ball bearings to assure high performance routing year after year. Close fit tolerance and carefully assembly to minimize thermal expansion, almost without heat generated, quiet, stable running in high-speed routing.
- 3-Position Depth Stops: A square turret built inside the head which gives 3 depths spindle travel control, stoppers may be adjustable. The knurled knob under head allows operator select depth conveniently
- Spindle Travel: Travel speed adjustment is made from controller on air cylinder. Maximum travel 3-3/4″. The spindle down feed is driven by air cylinder, operated with foot switch. Hydraulic controlled travel end speed provides smoothly feed against the work.
- Lubrication: Spindle assembly fitted with grease nipples for spindle bearing lubrication. Spindle stroke way is automatic lubricated, eliminate worry of failure lubrication.
- Rigid Table: The massive table is scientifically ribbed, precision ground, and perfect squareness to spindle. Rests on heavy trunnions permit 45-degree maximum tilt. Table surface slotted for holding guide fence accurately.
- Drive Belt: Top quality belt assures long service life. Belt tension is made with handwheel through a rack and gear mechanism giving positive belt tension and correct belt track.
- Collets Included – Double taper type: 1/4″ 3/8″, 1/2″, 5/8″. Metric sizes available as an option: 6, 9, 12mm.
- Guide Pins Included: 1/4″, 3/8″, 1/2″.
- 7.5HP Spindle Motor with magnetic switch.
- Dust cleaning air gun
- Brush ring shroud
- Fence for straight routing
- Dust Hood: 3″ diameter outlet
- Grease: One bottle spread, recommended grade SUN-742EP.
Chuck to table top maximum | 11″ (280mm) |
Throat clearance | 29-1/2″ (750mm) |
Spindle speeds (2 speeds) | 10,000 / 20,000 RPM |
Spindle travel | 3-3/4″ (95mm) |
Depth stops | 3 Position turret stops, adjustable |
Table travel | 7-1/2″ (190mm) |
Table surface area | 36″ x 40″ (915 x 1016mm) |
Table tilt | Front downward to 45degrees |
Micrometric table raise | 3/64″(1mm) per revolution of handwheel |
Collet sizes | 1/4″ 3/8″ 1/2″ 5/8″ |
Spindle drive motor | 7.5HP |
Belt size | 35 x 2330mm |
Net weight | 720kgs (1590 lbs) |
Gross weight | 900kgs (1990 lbs) |
Packing dimensions | 66″ x 44″ x 72″ (L x W x H) |
Machine electrics | 460/3/60 (11 amps) or 230/3/60 (22 amps) |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery1
ENGANCHADORA DE METAL PITTSBURG
ENGANCHADORA DE METAL PITTSBURG PARTE: PL-20E20 gauge capacity: can handle sheet metal up to 20 gauge, making it suitable for a wide range of applications.Creates tight, interlocking joints between two pieces of sheet metalMade with high-quality materials and construction for durability and longevityMaintenance-friendly design: The machine is designed for easy maintenance, with quick-access panels that allow for easy cleaning and lubrication.Compact and portable...
-500x500.png)
AMXmachinery1
TORNO 20'' x 40''
TORNO 20'' x 40'' PARTE: 2GM-GML-2060Bed Gap Metal Lathe # GML-2060, 20” x 60”, 3-1/8” bore, 10HPISO 9001 certified1-Year Parts Only WarrantyLarge spindle bore 3-1/8”Spindle D1-8Guideway width 12”Main motor 10HP16 spindle speeds from 25-1,800 rpm, 12 speeds4-way rapid traverse on the carriage longitudinal and cross60 kinds of inch threads, and 41 kinds of metric threadsThreading and feeding rate change without changing gearsSpindle is balanced...
AMXmachinery1
TROMPO - MOTOR 7.5 HP MESA DESLIZANTE
PARTE: 2CK-SS512CSB Is a ruggedly built sliding table shaper with refined features well suited for demanding production environments. Its’ versatile design makes it the ideal shaping solution for edge-profiling, door & furniture components, mouldings, tenoning, and more. The sliding table is cast iron and runs on bearings for smooth and vibration free movement. The powerful dual direction 7.5HP driven spindle allows for optimum shaping even with large profiles. The heavy-duty cast-iron ...
AMXmachinery1
ALIMENTADOR - VELOCIDAD VARIABLE - 3 RUEDAS
PARTE: 2CK-DC30Is a safe and powerful feeding unit for shapers, table saws, and more. The rubber feed wheels grip the workpiece firmly and feed it at a constant speed to produce flawlessly finished pieces. The DC brushless servo motor with electronic variable speed adjustment allows the operator full control for setting the optimum feed speed according to the specific job. The universal stand allows for quick positional adjustment from a horizontal to vertical positioning and everything in b...