Identificador: 2348
Abierta
ID de articulo : # 2348 se ha agregado a su lista de deseos.
.PNG)
.PNG)
.PNG)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
Descripción
CEPILLO 2 CARAS 30" X 8" 2CK-GT760ARD
The Cantek GT760ARD 30″ Double Surface Planer has a robust cast-iron body for industrial planing day in and day out. The spiral insert knife cutterheads produce a smooth planed finish with maximum stock removal. The material is passed over the bottom head with a spring-loaded pin feed system while the infeed bed is adjustable to determine how much material is removed. The final thickness is keyed in the digital control and the top head & feed assembly automatically move in place.
- Spring loaded conveyor pin system ensures material is passed over the bottom cutterhead to resulting in a flat and uniform board prior to planing to thickness on the top head
- Spiral insert knife cutterheads with two-sided solid carbide knives produce a smooth finish with increased stock removal capacity and extremely quiet operation
- Heavy-duty cast-iron machine body and table for vibration free cutting
- 30″ wide x 8″ thickness capacity (optional 16” & 20” opening)
- Cutterheads are spiral insert type with six (6) rows of carbide inserts
- (2) driven and (1) idle bed roll for superior feeding of even difficult material
- Digital electronic thickness adjustment in INCH and MM (Inch is to 0.001” resolution) for precise thickness control
- Swiveling control panel for more ergonomic access to machine controls
- Inverter variable speed control with feed speeds from 26 to 79 FPM
- Easy to access external handwheel adjustment of infeed bed
- Hard chromed worktable for high wear resistance
- Auto lubrication to conveyor chain, central lubrication for dovetail elevation guideways
- Section chipbreaker and sectional feed roller before top cutterhead
- Rubber outfeed top roller to prevent chip marking
- Over thickness safety shut-off bar across infeed.
- Ammeter for each motor on control panel to monitor motor load
Max. working width | 30″ |
Max. working thickness | 8″ (16″, 20″ optional) |
Min. working thickness | 0.4″ |
Min. workpiece length | 12.2″ |
Bottom head motor | 20 HP |
Top planing head motor | 25 HP |
Feed motor | 5 HP |
Table elevation motor | 1 HP |
Cutterhead diameter | 4″ |
Knife dimensions | 30mmx12mmx1.5mm (114 pcs per head) |
Cutterhead speed | 5000 RPM |
Feed speed (variable) | 26-79 FPM |
Dust ports | (2) 6″ |
Machine dimensions (LxWxH) | 107″ x 55″ x 75.6″ |
Machine weight | 7040 lbs |
Packaging dimensions | 110” x 55″ x 77” |
Shipping weight | 7700 lbs |
Electrical requirement | 460/3/60 = 71 amps575/3/60 = 57 amps |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery1
PERFORADORA DE CLAVIJAS
PERFORADORA DE CLAVIJAS• Drilling from 4 sides: top, right, left, back• Capacity up to 14 pcs/min• Set-up help using light beam• Vertical magazine• One-man operatedExtra• Side movement• Small millings• 45 degree drilling• Can be integrated in a line of machines• Waste ConveyerLength:250 – 2200 mmHeight:10 – 65 mmWidth:25 – 200 mm
AMXmachinery1
SIERRA ESCUADRADORA - 10 PIES
PARTE: 2CK-D405AIs the ideal sliding panel saw for high accuracy cutting of sheet materials to produce kitchen cabinetry, furniture, millwork operations, and more. This is our most industrial saw with manual setting rip fence. The 10’ sliding table is made from a precision aluminum extrusion and runs on precision linear guide rails. It has motorized rise/fall and tilt of the blades.Motorized blade height & tilt adjustment with a digital angle readoutPrecision sliding table runs on hardened...
AMXmachinery1
SIERRA TRONZADORA - 30 PULGADAS
PARTE: 2CK-PCS30Is the ideal solution for increasing production on crosscut operations while maintaining optimum safety. Its powerful motor and adjustable cutting stroke ensure it can effortlessly cut through a wide range of materials and dimensions. A number of features are included to ensure safe operation such as the infeed/outfeed safety guard, microswitches on all access doors, and a security bolt on the saw access door. Available in either left-hand or right-hand operation depending on you...
AMXmachinery1
SIERRA DOBLE - 45 GRADOS - 20 PULGADAS
PARTE: 2CK-PCM508Is a precision pneumatic saw designed for cutting miters up to 60o in either direction. The saw is automatically cycled pneumatically and activated by a foot switch to allow for fast positioning of the workpiece. Capable of production cutting with up to 40 cuts per minute. The cutting speed is adjustable to ensure the optimum finish result on your workpiece no matter the species or size. The rotary table runs on ball bearings to ensure effortless rotation of the blade ...