Identificador: 2339
Abierta
ID de articulo : # 2339 se ha agregado a su lista de deseos.
.PNG)
.jpg)
Descripción
COLECTOR DE POLVOS - 3HP - 2CK-UFO102B
Is ideal for the small shop looking to collect wood dust or for the larger shop to provide additional dust collection beyond the capacity of their central system. The upper and lower bags are made of cotton and help filter the collected air before it is recycled into the shop and also collects the dust for disposal. The base is mounted on casters so it can be taken to where it is needed in the shop.
- 3HP generating 1883 CFM
- Base is mounted on casters so it can be moved around the shop to where it is needed
- Durable cotton filter bags
- CSA / UL magnetic starter included
- 3HP Motor
- 1883 CFM
- 6” main inlet with removable outlet with (3) 4” ports
CFM | 1883 CFM |
Motor | 3 HP |
Main inlet diameter | 6″ |
Connector inlet diameter | (3) 4″ |
Bag Volume | 10.48 cubic feet |
Static pressure of water | 9.26 inch |
Top bags (2) | 18.9″ x 31 ½” |
Bottom bags (2) | 18.9″ x 31 ½” |
Electrics | 230/1/60 = 17 Full Load Amps |
Net weight | 169 lbs |
Shipping weight | 180 lbs |
Shipping dimensions | 48″ x 23″ x 23″ |
Noise Level | 80dB |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery1
TALADRO MULTIPLE - HORIZONTAL
PARTE: 2CK-BM-301FEATURES:Motor and drilling head mounted on carriage, sliding on parallel bars with pneumatic movement.Come with adjustable two spindle drill head.Pneumatic work clamp to firmly hold workpieces.Machine operation activated by shrouded foot pedal.Cast iron work table with miter gauge for angled holes.Screw rise and fall adjustment of work table for varying timber thicknesses.Enclosed sheet steel floor stand supporting the machine.
Table size
400 x 2...
AMXmachinery1
FINGER JOINT AUTOMATICA
FINGER JOINT AUTOMATICA PARTE: 2CK-FL18Represents a state-of-the-art finger jointing production line, meticulously engineered to transform wood waste into valuable materials with an exceptional balance between performance and cost-efficiency. From the initial workpiece in-feed to the precise left and right shaping and ultimately the jointing process, every step is executed swiftly and accurately. The entire production line has been thoughtfully crafted for enduring reliabi...
AMXmachinery1
REBAJADORA DE CAJONES
PARTE: 2CK-JEN60Designed to both notch and drill drawer boxes to install undermount soft-close drawer slides. The operation of the machine is simple with a self-indexing drilling unit that’s determined by the position of the drawer for either left or right notching. With a cycle time of approximately 10 seconds per drawer, you can achieve a high throughput and save time for other important tasks.High production capacity of up to 220 drawers machined per hour.57mm (2 ¼”) wide cutter head...
AMXmachinery1
COLECTOR DE POLVOS
COLECTOR DE POLVOS PARTE: 2GM-WDC-2100Our wet dust collector system offers safe and efficient method for collecting hazardous dust particles cause by grinding, sanding, or cutting metals. If you’re in the market for a stainless steel wet dust collector that helps eliminate hazardous matter from your machine shop that is created by either a grinding, sanding, or a cutting process, then look no further. Call us today to better understand your process/application and pr...