Identificador: 233
Abierta
ID de articulo : # 233 se ha agregado a su lista de deseos.
.jpg)
.jpg)
Descripción
PARTE # 2TA-DS-2500 - LIJADORA DE TAMBOR LOBO/CASTALY - 25" DE ANCHO
PARTE # 2TA-DS-3700 - LIJADORA DE TAMBOR LOBO/CASTALY - 37" DE ANCHO
Caracteristicas:
- Easily operate with performance for sanding flat objects.
- Heavy sheet metal cabinet stand.
- Balanced cast aluminum sanding drums.
- Two different grits and level sanding drums are designed for fast and fine finish at one pass.
- First drum is cast aluminum; second drum is coated with rubber for fine sand paper.
- Automatic feeding operates by non-slipping rubber grips conveyor.
- Raise or lower the table easily by large hand wheel.
- Three spring loaded pressure rolls keep the object flat on conveyor without sliding.
- Full power industrial motor for durability usage.
- Magnetic switch with overload protection.
- Precision sealed long life bearing.
| SPECIFICATIONS | DS-2500 | DS-3700 |
| Max. Sanding Width | 25" | 37" |
| Max. Sanding Thickness | 4" | 4" |
| Table Dimensions | 25" x 34¼" | 37" x 34¼" |
| Sanding Drum Dia. | 6" | 6" |
| Speed of Sanding Drum | 1700 RPM | 1700 RPM |
| Feeding Speed | 12 FPM | 12 FPM |
| Sanding Speed | 5 HP | 5 HP |
| Feeding Motor | ¼ HP | ¼ HP |
| N.W. | 1050 LBS | 1120 LBS |
| G.W. | 1180 LBS | 1270 LBS |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 12516 - COMPRESOR TORNILLO - INGERSOL-RAND – 20 HP
PARTE: 12516 - COMPRESOR TORNILLO - INGERSOL-RAND – 20 HP
USADA - BUENAS CONDICIONES
220/440V, 3 FASES, CONECTADO ACTUALMENTE A 440V
AMXmachinery
SIERRA ESCUADRADORA 1600 MM
PARTE # 2TA-TS-P1600MA - SIERRA ESCUADRADORA - 1600 MMHeavy duty construction provides vibration free operation. Easy to set up and adjust.Manual raise, lower and tilt of main blade and scoring saw.Scoring unit provides clean, accurate, chip free cutting, ready for edge banding.Sealed main shaft bearings (lubricated for life) with vibration dampening system.Highly accurate, freely moving sliding table with wear resistant guide rails and rollers.Specially designed roller carriage, utilizing alumi...
AMXmachinery
PARTE: 12600 – PERFORADORA DE BISAGRAS – GANNER 820
PARTE: 12600 – PERFORADORA DE BISAGRAS – GANNER 820USADA - BUENAS CONDICIONESMarca: GANNER Modelo: 820 (Gannomat Express)Voltaje: Cuenta con transformador puedes alimentar con 220 VAC 440 VAC TrifásicoPresión de aire:90PSILargo de la cama de alimentación: 2.49 metrosPerforadora de bisagras con scanner para código de barras, para perforación automática se puede trabajar del lado izquierdo y derecho, mientras perforas del lado izquierdo montas la siguiente pieza del lado derecho
AMXmachinery
COLECTOR ASERRIN 10, 20, 25 HP
PARTE # 2TA-DC-9100 – COLECTOR DE ASERRIN – MOTOR 10 HP – 8900 CFMPARTE # 2TA-DC-9200 – COLECTOR DE ASERRIN – MOTOR 20 HP – 12200 CFMPARTE # 2TA-DC-9250 – COLECTOR DE ASERRIN – MOTOR 25 HP – 14600 CFMNuevo con garantia- Heavy sheet metal frame and base.- Extra large radial-fin type steel impeller for high efficiency air flow.- Heavy duty, totally enclosed industrial motor for maximum air suction and extended service life.- Low sound levels to keep the working area quiet.SPECIFI...