Identificador: 2325
Abierta
ID de articulo : # 2325 se ha agregado a su lista de deseos.
PARTE: 4EL-DSX - SIERRAS ESCUADRADORAS VERTICALES - ELCON - SERIE DSX
AMXmachinery
Descripción
PARTE: 4EL-DSX - SIERRAS ESCUADRADORAS VERTICALES - ELCON - SERIE DSX
SERIE DSX-155
SERIE DSX-185
SERIE DSX-215
SERIE DSXL-155
SERIE DSXL-185
SERIE DSXL-215
SERIE DSX1/2L
SERIE DSX1/2L
SERIE DSX1/2L
|
Model & Dimensions (mm) |
155 |
185 |
215 |
|
Maximum cutting length |
3300 |
3300 |
4300 |
|
Maximum cutting height - Horizontal |
1505 |
1805 |
2105 |
|
Maximum cutting height - Vertical |
1550 |
1850 |
2150 |
Description:
The DSX models are designed for industrial use and have a large ouput capacity with e.g. increased cutting depth, pneumatic plunging and a motor rating upto 7.5 HP. A wide variety of accessories is available, such as many automatic functionalities and programming of cutting patterns.
Equipped with:
-1 meter point
4,0kW motor
Control buttons on saw-head
Options:
Motor 5.5 kW-S6 (DSX)
Variable rotation speed for 4.0kW motor
Variable rotation speed for 5.5kW motor (option O004)
Automatic shifting back frame (pneumatic)
Pneumatic mid fence
Pneumatic rotation of saw head
Pneumatic lifting transportrollers
Aluminium bottom rollers incl clamp
Pneumatic panel clamp
Pneumatic panel clamp (extra)
Extension to measuring stop
Cutting length 4.300 mm (type 185)
Cutting length 5.300 mm (type 215)
Digital read out horizontal
Digital read out vertical
Programmable vertical cutting
V-grooving set 90 degrees
Lubrication for non-ferro materials
Electro-pneumatic double cut scoring incl. compressed air curtain
Extra dust extraction at the right hand side in side panel
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 2TA-PT-2024HF – PRENSA DE TABLEROS - ALTA FRECUENCIA 20” X 24”
PARTE: 2TA-PT-2024HF – PRENSA DE TABLEROS - ALTA FRECUENCIA 20” X 24”New with warrantyFor mass productions, 2 to 3 minute per cycle for drying or bending the wood projectVarieties of wood bending shapes are able to produce.Press one large part, slicing into many small pieces for high productivity.Meet all kinds of furniture fabrications.One high frequency generator could output two wood-bending presses, or one output four wood-bending presses to achieve continuous mass production.Using woo...
AMXmachinery
SIERRA VERTICAL ELCON CON NAVAJA
PARTE: 4EL-LANCET - SIERRA VERTICAL - CON NAVAJA - ELCONHow to improve/speed up the processing of multiwall polycarbonate sheets?By using a static knife instead of a sawblade. This reduces the amount of time spent on cleaning out the channels. The static knife delivers precise and clean cuts, without chips. Thus reducing wasting time on the post-processing. Some of the companies owning a Lancet reported up to 75% time saved.The Elcon Lancet is another #custombuilt solution that very few people...
AMXmachinery
MAQUINA DE JUNTAR LISTONES
PARTE # 2FZ-MAS130 - MAQUINA DE JUNTAR LISTONESNueva con garantíaMáquina de Juntar Listones, con equipamiento para aplicación de la cola sobre el hilo, modelo “MAC 10” y DPA con riscador.Datos TécnicosLargo máx. del panel: 3.3 mAncho máx. del panel: 1.3 mAncho min. del panel: 0.45 mEspesor máx. del listón: 40 mmLargo mín. del listón: 20 cmCapacidad de producción en metros cuadrados p/hora: 180Potencia total instalada:(con aplicador de cola MAC-10) 24 kWConsumo de aire comprimido, ...
AMXmachinery
PARTE: AMX-10125 - EXTRACTOR DE TUBO - ASPAS 15” DIAMETRO - MOTOR ½ HP
PARTE: AMX-10125 - EXTRACTOR DE TUBO - ASPAS 15”
DIAMETRO - MOTOR ½ HP
USADO - BUENAS CONDICIONES
MOTOR 1/2 HP, 220/440V, 3 FASES
MEDIDAS: 15” DIAMETRO INTERIOR X
19” DIAMETRO EXTERIOR X 12” FONDO