Identificador: 230
Abierta
ID de articulo : # 230 se ha agregado a su lista de deseos.
Descripción
PARTE # 2AM-410 - TROMPO/PULIDOR CON ALIMENTADOR INTEGRADO PARA MOLDURAS RECTAS Y CURVAS
Shaper Motor: 7.5 HP Belt Driven
Shaper Spindle Speed: 4000-7000 rpm
Shaper Spindle: 1-¼" Dia.
Sander Motors: 1.5 HP Direct Drive
Sander Spindle Speed: 400-1800 rpm
Sander Spindles: 1" Dia. by 4" Tall
Voltage: 208-240V 3ph, 30A
208-240V 1ph, 40A
440V 3ph, 15A
Conveyor: 6" Wide, 4 rows of tires
Vertical Adjustment: Yes, with digital counters
Horizontal Adjustment: Yes, with digital counters
Sanding Wheel Tilt: 60º Forward; 40º Back
Fence: 5 adjustable stops
Table Height: 36 inches
Size: 75" x 36" x 54"
Weight: 1325 lbs
Plantilla Centradora para curvas - opcional
Designed and manufactured to give years of dependable service, the Larick 410 will shape and sand a wide variety of workpieces. Features include a 6" wide feed chain with four staggered rows of hold down tires; front adjusting handwheels with digital readouts for horizontal and vertical shaper and sander positions; AC inverter controlled variable speed for shaper, sanders, and feed featuring digital readouts for speed and load; floating heads are optional which allow shaping and sanding of arched panels. The user friendly design makes setup and profile changeovers quick and easy.
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 12198-2 - SIERRA MULTIPLE - DE VAIVEN - WINTERSTEIGER
PARTE:
12198-2 - SIERRA MULTIPLE - DE VAIVEN - WINTERSTEIGER
USADA – BUENAS CONDICIONESMod. Eco DS0 Manufacture year 1999
Multi-channel
to cut 4 boards at same timeInclude 1
frame of 500 mm blade and 1 for 400 mm blades.
480 Volts
AMXmachinery
DOBRADORA DE TUBO HIDRAULICA
PARTE # 2MA-HTB-2 - DOBRADORA DE TUBO HIDRAULICANueva con garantia- Bends up to 2"schedule 40 pipe (1.54")- Dies available in 120 and 240 degrees- Dies and all Pins are heat treated- Bronze bushings at Pivot Points- Capabilities greater than benders costing 3 times as much- High quality components and cosntructionTube Dies: 3/4", 7/8", 1", 1-1/8", 1-1/4", 1-1/2", 1-3/4", 1-5/8", 2" for 120 degrees for radius 120 and 240 degreesPipe Dies: 3/4", 1", 1-1/4", 1-1/2" for Radius 120 and 240 degreesWei...
AMXmachinery
PARTE: 12651 - CEPILLO - 4 CARAS - 18” ANCHO - PINHEIRO
PARTE:
12651 - CEPILLO - 4 CARAS - 18” ANCHO -
PINHEIRO
Usado – Muy buenas condicionesCapacity: 6" x 18"Bottom Head Motor: 12 HPTop Head Motor: 18 HPSide-Head Motor: 9 HP EachFeed Motor: 3 HPFeed Rate: 30 & 60 FPMSide Head Spindle Diameters: 40mm
*Specifications are from manufacturer literature and need to be
confirmed*
AMXmachinery
PARTE: 12654 - LIJADORA - CALIBRADORA - BANDA ANCHA – 2 LIJAS - 36” ANCHO
PARTE: 12654 - LIJADORA - CALIBRADORA - BANDA ANCHA
– 2 LIJAS - 36” ANCHO
Usada
Motor principal: (2) 5 HP, conectada 440V, 3 fases
Motor avance: 3 HP, conectada 440V, 3 fases