Identificador: 2284
Abierta
ID de articulo : # 2284 se ha agregado a su lista de deseos.
Descripción
PARTE: 12527 - ENCHAPADORA DE CANTOS - BIESSE AKRON 1435A
USADA – MUY BUENAS CONDICIONES
Year: 2018
CAPABILITIES
-One-sided edgebander with glue pot
-CNC control and command system with TS10 digital controller, large ``touch screenLCD graphic display, WINDOWS CE operating system, USB port
-Chain drive and upper presser
-Group of pressure rollers
Workstation :
-Premilling
-Gluing unit with pellet pot
-Adjustable pneumatic pressure unit
-End cutting unit 2 tilting saws 0-15˚ for bevel cutting, motor 0.50Kw
-Fine trimming top and bottom trimming unit, 0.65Kw motor
-Radius scraper unit for 3mm pvc finishing
-Polishing brush unit, 0.37Kw motor
Specifications:
-Minimum & maximum thickness of the part: 10 to 60mm
-Minimum width of the part: 85mm
-Minimum piece length: 140mm
-Tape thickness in roll: 0.4 to 3mm
-Thickness of the pre-cut wooden strip: up to 8mm x 45mm high
-Variable feed speed: up to 12m/min
-Edgebander length 16` and 6 inches
-Automatic start of the groups and motors foreseen in the program.
-2nd pass direct selection key.
-Management of 8 digital axes
-Lists of programs with manual and/or automatic launch.
-Diagnosis of errors with codes and comments.
-Statistical production data.
-This device is mounted on an adjustable suspended control panel
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PAMBACERA NEUMATICA
PARTE: 12405-8 - PAMBACERA
NEUMATICA
USADA - BUENAS CONDICIONES
220V, 3 FASES
-500x500.jpg)
AMXmachinery
CEPILLO NEWMAN 500 - 4 CARAS
PARTE:
11763 - CEPILLO NEWMAN 500 - 4 CARAS
11 - CEPILLO NEWMAN
500 - 4 CARAS
AMXmachinery
PARTE: 12651 - CEPILLO - 4 CARAS - 18” ANCHO - PINHEIRO
PARTE:
12651 - CEPILLO - 4 CARAS - 18” ANCHO -
PINHEIRO
Usado – Muy buenas condicionesCapacity: 6" x 18"Bottom Head Motor: 12 HPTop Head Motor: 18 HPSide-Head Motor: 9 HP EachFeed Motor: 3 HPFeed Rate: 30 & 60 FPMSide Head Spindle Diameters: 40mm
*Specifications are from manufacturer literature and need to be
confirmed*
AMXmachinery
TORNO COPIADOR IRREGULAR MULTIPLE CON LIJADOR
PARTE # 2TA-CL-1006S - TORNO COPIADOR IRREGULAR MULTIPLE CON LIJADORPARA FABRICAR 4 a 5 PIEZAS A LA VEZIDEAL PARA EL COPIADO MULTIPLE DE PIEZAS COMO PATAS PARA SILLAS PROVENZALES Y QUEEN ANNE, CABOS PARA PALA, ZAPAPICO, ETC.Features:Use the template to make easy duplicate copy performance.Specially designed for processing wood under the length of 39-1/2" and diameter of 8-1/4".Runs automatic continual cycles from feeding to finish.Variable cutting speed controls and uses hydraulic power to get ...