Identificador: 2280
Abierta
ID de articulo : # 2280 se ha agregado a su lista de deseos.
Descripción
PARTE: 12525 - CENTRO DE TRABAJO CNC - ROVER A 1332 ATS
Year: 2012
Specifications:
Working Field:
X - Axis: 3280mm (129.1")
Y - Axis: 1320mm (52")
Z - Axis: 170mm (7")
(6) ATS Panel Support Rails
Biesse's ATS (auto locating pods)
Panel Lift Supports for Loading & Unloading of Sheets
Multi Zone Working Areas
Front, Rear & Side Stops
17.7 HP HSD Electrospindle (HSKF63)
12 Position Rotary Tool Changer
BH 17L Boring Head w/ quick change system
(10) Vert. Spindles (7 in X & 3 in Y)
(3) Horz. Spindles (2 in X & 1 in Y)
Saw Blade Unit 120mm
Auto Lubrication
Remote Keyboard Controls
PC Driven XP600 Control
Windows XP Operating System
PC Computer w/19" Color Monitor
CD -ROM Reader
20 GB Hard Disk w/Keyboard & Mouse
Becker Vacuum Pump
B-Solid Software Included
|
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
SIERRA CINTA – VOLANTES 36” – 20 HP - CON ALIMENTADOR – STENNER
PARTE: 12227 – SIERRA CINTA – VOLANTES 36” – 20 HP - CON
ALIMENTADOR – STENNER
USADA – MUY BUENAS CONDICIONES
Wheel
Diameter: 36"
Max.
Bandsaw Width: 100mm
Maximum
Depth of Cut: 370mm
Saw
Motor: 20 HP, 230/460v, 3ph
Feed
Motor: 0.55 HP, 230/460v, 3ph
Feed
Speeds: 7.5, 15, 22.5, and 30 m/min (Need to Change Belt)
Table Size: 31" x 37"
AMXmachinery
SOLDADORA DE SIERRA CINTAS
PARTE: 4VF-VC4 – SOLDADORA DE SIERRA CINTASReliable, inexpensive and very easy to use.Manual welding and annealing.Shear included.Steel Band Width [min-max]: 10 – 40 mmBand Thickness [min-max]: 0,5 – 1,1 mmPower Absorbed: 4,5 kWNet – Gross Weight: 51 – 72 kgMachine Dimensions [D x W x H]: 49 x 52 x 32 cmPacking Dimensions [D x W x H]: 62 x 82 x 50 cm
AMXmachinery
PARTE: 2TA-PT-13HF-GN – GENERADOR - ALTA FRECUENCIA 13 KW
PARTE: 2TA-PT-13HF-GN – GENERADOR - ALTA FRECUENCIA 13 KWNew with warrantyFor mass productions, 2 to 3 minute per cycle for drying or bending the wood projectVarieties of wood bending shapes are able to produce.Press one large part, slicing into many small pieces for high productivity.Meet all kinds of furniture fabrications.One high frequency generator could output two wood-bending presses, or one output four wood-bending presses to achieve continuous mass production.Using wooden mold instead...
AMXmachinery
ROUTER CNC - MODEL I
PART # 2TA-I-0408 - ROUTER CNC - MESA 4' X 8' - MOTOR 5 HP - CON MESA DE VACIOPART # 2TA-I-0510 - ROUTER CNC - MESA 5' X 10' - MOTOR 5 HP - CON MESA DE VACIOAll “SERVO MOTOR” driving systemPC base CNC controller is set up to accept standard G code programming formats along with on board conversational applications.User friendly IC Control System powerful closed positioning loop software with Ethernet interface for data transfer from PC.All axis are driven by brushless type high torque AC ser...