Identificador: 223
Abierta
ID de articulo : # 223 se ha agregado a su lista de deseos.
Descripción
PARTE # 2TA-SD-904MU – LIJADORA DE MOLDURAS – 4 CABEZALES
Nueva con garantía
Variable feeding 20" to 80" to get different setup easily.
Every sanding head can use profile disc, brush wheel or sand belt with sponge drum for fine, detail finish.
Max. sanding thickness 4".
Min. sanding length 13".
Sanding spindle 1-1/4" dia. 2 HP.
Max sanding wheel 12" dia.
SPECIFICATIONS |
|
Wheel, Belt Head |
|
Brush Wheel Drive Motor | 2 HP |
Brush Tilts | 90° ~ 180° |
Sanding Belt | 3" x 20" |
Sanding Wheel Dia. Max | 8" |
Sanding Spindle Dia. | 1" |
Spindle Speed | 0 ~ 3600 RPM |
Profile Platen Belt Head |
|
Range of Workpiece Width | 2" ~ 70" |
Minimum Length of Workpiece | 4" |
Range of Workpiece Thickness | 1/6" ~ 4" |
Designed for high production moulding sanding of straight stick of solid wood, veneered panel and finish between coats with profile, angular, or straight edge.
Workpiece is through feed with power spring load pressure rolls at top, without sliding for irregular surface.
The brush, flap wheel, pneumatic drum or profile sanding head to cover all the profile sanding.
Top sanding head can be adjusted in & out, up & down.
Side sanding head can be adjusted tilt, forward & backward and up & down.
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
-500x500.jpg)
AMXmachinery
LIJADORA DE DISCO Y BANDA
PARTE:
2AR-97181 – LIJADORA DE DISCO Y BANDANUEVA EN SU CAJA ORIGINALPowerful
3.5 amp motorCast
aluminum table tilts to 60° for use with belt or disc6
in. disc for fast stock removalMiter
gauge for sanding angles on workpieceAdjustable
belt sands inside and outside curvesReinforced steel motor housingAC
Volts: 120Accessories
Included: Miter gauge, sanding belt and sanding discAmperage
(amps): 3.5Belt
width”: 4 in.Diameter
disk: 6 in.Horsepower
(hp): 3/4Speed
(max): 1819 RPM (di...
AMXmachinery
OVER ARM ROUTER
PARTE # 2EV-2480 - OVER ARM ROUTER - EVANS 2480 - 220 Volt, 3 Phase, 10 amp- Standard Features:- 3 HP High frequency router motor- 80 PSI Required- 18,000 RPM- Working height 33"- Includes router bit Part # 08018- 30" x 48" cutting area- Crated weight 1500 LBS. Shipping dimensions 69” long X 72” wide X 65” highOptional:- 440 Volt, 3 Ph. 5 amp, 80 PSI
AMXmachinery
AFILADOR DE BROCAS Y CORTADORES RECTOS
PARTE: 2EB-SF-U3R8 - AFILADOR DE BROCAS Y CORTADORES RECTOS UNIVERSALMaquina ara afilado para diferentes tipos de cortadores, brocas, para metal, madera, etcVideos de la maquina: Video 1Características:1. Concise and easy, and grind out in a straight line.2. Strength increase, increase the service life of blade and processing capacity.3. High grinding accuracy, easy to install, aesthetically pleasing, novel structure, flexible the rotating parts, low noise, small vibration, tool post part be...
AMXmachinery
LIJADORA DE BANDA ANCHA – COSTA
PARTE: 12201 - LIJADORA DE BANDA
ANCHA – ANCHO 1150 MM - COSTA
USADA – BUENAS CONDICIONESModel: 71 C1150Manufacture
year 1994
V380
Hz50
1
Steel Roller
Total
32 Kw (40 HP)