Identificador: 2026
Abierta
ID de articulo : # 2026 se ha agregado a su lista de deseos.
Descripción
PARTE: 12417 - SIERRA INGLETERA DOBLE – CAPACIDAD 13” - 100” LARGO – CTD
USADA – MUY BUENAS CONDICIONES
3 HP TEFC Dual Voltage Motors
Wired for 460 Volt, 3 Phase
Start and E-Stop buttons
Left head fixed, Right head manually position via hand crank
Minimum Cut Length @ 90 = 13”
Maximum cut length @ 90 = 100”
Both heads rotate inward 90 to 45 degree
Both heads tilt outward to 45 degree for compound
Two hand anti tie down cycle control on pedestal
Built in 3rd party hydro-check
Pneumatic filter/regulator
Pneumatic flow control for head operation
Pre-arranged for horizontal and vertical clamps with footpedal
2 @ 12” Carbide tipped saw blades
SIKO electronic digital readout with magnetic encoder
Two center work supports
Very Good condition, cleaned and checked
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 1SL-DC-SE2500 - SIERRA ESCUADRADORA - 2500 MM
PARTE: 1SL-DC-SE2500 - SIERRA ESCUADRADORA - 2500 MMNUEVA CON GARANTIAMOTOR PRINCIPAL: 5 HP, 220V, 60 Hz, 3 FASEMOTOR DISCO INCISOR: 1 HP, 220V, 60 Hz, 3 FASESDIAMETRO DISCO PRINCIPAL: 12"DIAMETRO DISCO INCISOR: 4-3/4"DIAMETRO DEL EJE PRINCIPAL: 1-3/16"DIAMETRO DEL EJE INCISOR: 20 MMVELOCIDAD DEL DISCO PRINCIPAL: 2 VELOCODADES, 4,000 Y 6000 RPMVELOCIDAD DISCO INCISOR: 8000 RPMDIMENSIONES DE LA MESA CON EXTENSIONES: 62" X 63"ALTURA DE LA MESA: 36"DIMENSIONES DEL CARRO DESLIZABLE: 14" X 98-...
AMXmachinery
PART: 12565-E - DUST COLLECTOR - MOTOR 10 HP - BELFAB
PART: 12565-E - DUST
COLLECTOR - MOTOR 10 HP - BELFABUSED - VERY GOOD
CONDITIONMain Motor: 10 HP, 230/460v, 3phStart/Stop
Station for 230v, 3phChip Collect in
Two Lower Plastic Bags
Filtration Surface (sq.ft): 331.63
AMXmachinery
MEDIDOR DE HUMEDAD PARA MADERA – CON 2 PINS - LIGNOMAT – MINI-LIGNO E/D
PARTE: 2LI-ED-0 - MEDIDOR DE HUMEDAD PARA MADERA – CON 2 PINS - LIGNOMAT – MINI-LIGNO E/DNuevo con garantíaMeasuringRange6-45%DisplayBright LED display with 0.1% resolution below 10% and 1% steps above 10%. Lifetime warranty for the most durable display.SpeciesCorrections2 Wood groups for softwoods and hardwoods, wood-based panel productsCalibrationStable calibration not affected by ambient temperature. Calibration is internally checked and automatically adjusted if necessary. All mini-Li...
4,500.00 MXN
AMXmachinery
PARTE: 12545 - LINEA DE PINTURA UV - SUPERFICI MINI PLUS
PARTE: 12545 - LINEA DE
PINTURA UV - SUPERFICI MINI PLUS
USADA -
MUY BUIENAS CONDICIONESPassline Height: 900 mm
Operating side: RH, as viewed from inlet of line, LH available as a special order.
Workpiece Dimensions (Approx.):
Min. - max. length: 300 mm - 4880 mm (12" - 16')
Min. - max. width: 25 mm - 1300 mm (1" - 51”)
Min. - max. thickness: 3 mm - 90 mm (1/8" - 3-1/2")
Max. weight: 3# per sq. ft
Speeds:
Mechanical speed: 1-3 m/min
Avg. production speed: 2 m/min
Connections:
...