Identificador: 199
Abierta
ID de articulo : # 199 se ha agregado a su lista de deseos.
Descripción
PARTE # 1RU-CH-BRYKO - ENCHAPADORA DE CANTOS RECTOS AUTOMATICA
Calderin de cola termo fusible con cubeta teflonada y termostato digital con temperatura en espera. Alimentación automática para tiras y material en rollo hasta 2mm. Rodillo presión motorizado rodillo adicional. Retestador bisierra con motor alta frecuencia. Refilador superior e inferior con copiadores y regulación mediante indicadores neumáticos.
Características
Altura de trabajo min. / Máx. 8-40 mm.
Espesor del canto min. / Máx. 0.4-2 mm.
Longitud min. del tablero 120 mm.
Ancho min. Del tablero 75 mm.
Velocidad rotación herramientas 12000rpm Velocidad de avance 5.5 m/imin
Presión de aire necesaria 6-7 bar Potencia total instalada 2.5Kw .
Peso neto aproximado 440 Kg.
Dimensiones 1910x1000x1190 mm
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
TINA DE 20 GALONES
PARTE: 1SL-DC-PW20G - TINA DE 20 GALONES PARA LAVAR PARTESTrabaja con Diesel, Petroleo y liquido DioelectricoMedidas Tina: 30 cms alto x 78 cms largo x 54 cms fondoMedidas Patas: 63 cms de largo
AMXmachinery
ENGOMADORA 1 LADO – 63” ANCHO - QUICK
PARTE: 12132
- ENGOMADORA 1 LADO – 63” ANCHO - QUICK
COMO NUEVA – NUNCA USADA
Width capacity: 63"
Maximum opening: 1-3/4"
Feed rate: 64 FPM (single speed)
8.27" diameter grooved acid and heat resistant SBR
rubber covered glue rolls
6.9" diameter hard rubber covered doctor rolls
Glue spread and material thickness are manually adjusted
made by turning chrome plated hand wheels
Aluminum drip pan catches clean up water
Powered by 2 HP motor
Includes roll guards...
AMXmachinery
SIERRA VERTICAL ELCON ESPECIAL 1
ELCON 320 DSX-E TO CUT THROUGHT 0-135 MM AUMINUMA vertical panel saw can be used to cut through various materials, like wood based,plastics, composites etc.This episode's custom built Elcon panel saw was developed to cut through aluminium tailgate / cargolift. A bar code scanner tells the machine to cut off the left and left and right side. The sawing speed is automatically adjusted to the thickness of the material, in this case up to 135mm!
AMXmachinery
REASERRADORA 1 SIERRA 12"
PARTE # 2TA-BS-1212HR - REASERRADORA HORIZONTAL – 1 SIERRANUEVA CON GARANTIAMachine was built with ruggedly constructed throughout for maximum stability, high precision cutting and minimum trouble.It is equipped with a digital controller for convenient and accurate thickness setting.The feed conveyor has a tilting design allowing for maximum 30 degree bevel cuts.When the feed conveyor is tilted for bevel cutting a side support is applied for safe and stable cutting operations.Variable feed spe...