Identificador: 198
Abierta
ID de articulo : # 198 se ha agregado a su lista de deseos.
Descripción
PARTE # 2TA-EB-7B - ENCHAPADORA DE CANTOS RECTOS
Automatic feed station for: Pre-milling, Gluing, Pneumatic Guillotine, Double End trimming, Top & Bottom Rough Edge Trimming, Corner Rounding & Fine Top & Bottom Fine Edge trimming, Edge Scraping, Grooving, Edge Polishing
- The feed of edging material, by ** strip ** or coil is automatic and synchronously with panel feed.
- Total enclosure covers with dust hood connector.
- Heavy and rigid construction to ensure necessary accuracy and stability.
- To guarantee straight-line feed of the panel, a double row of rubber toothed rollers is off centered onto top pressure beam and bottom feed track with rubber calibrated pads is running on cylindrical guide.
- The top pressure beam is supported with two reinforced columns are equipped with visible linkages for thickness adjustment.
- Extension rollers support for wider panels.
- The electric and pneumatic system is incorporated in the built-in control cabinets.
- Side Pressure Unit: Standard with one row of vertical rollers for straight edges.
- Pre-Milling Unit: Two pre-milling heads running different direction to clean the surface without breaking the edge.
- Gluing Unit: With the use of HOT melt glue applied on straight Panel for edges banding.
- End Cutting Unit: Pneumatic guillotine application for cutting end of band material
- Double End Trimming Unit: Application for fine trimming front & rear edge by saw blade with two independent motors
- Edge Rough Trimming Unit: This top and bottom edge heavy trimming unit is complete by cutter head with two independent motors
- Corner Rounding and Edge Fine Trimming Unit: This top and bottom edge fine trimming unit is complete by cutter head with two independent motors to rounding the corner and edge automatically
- Scrapping Unit: Apply for scrapping top and bottom corners of PVC or ABS,
- Grooving Unit: Apply the groove, notch to the material surface.
- Polishing Unit: Apply the finest finish surfacing process on top and bottom edge.
| SPECIFICATIONS | EB-7B |
| PVC Film Band Thickness | 0.4 ~ 3 MM |
| Wood Strip Band Thickness | 8 MM |
| Max. Band Width Over Work Piece Both Side | 2 MM |
| Work Piece Thickness | 10 ~ 50 MM |
| Work Piece Min. Length (When use Pre-milling) | 6.3" |
| Work Piece Min. Length (When use Pre-milling) | 15" |
| Work Piece Min. Width | 3.5" |
| Edge Band Feed Motor | 0.025 KW |
| Pre-milling Motor | 2 KW x 2 |
| Gluing Motor | 0.75 KW |
| End Trimming Speed | 12000 RPM |
| End Trimming Motor | 0.37 KW x 2 |
| Rough Edge Trimming Speed | 12000 RPM |
| Rough Edge Trimming Motor | 0.75 KW x 2 |
| Corner Rounding and Fine Edge Trimming Speed | 12000 RPM |
| Corner Rounding Fine Edge Trimming Motor | 0.37 KW x 2 |
| Scraping Unit | Top & Bottom |
| Polish Wheel Speed | 1400 RPM |
| Polish Motor | 0.18 KW x 2 |
| Feed Speed | 1 ~ 49 FPM |
| Feed Motor | 1.5 KW |
| Heating Glue Tank Power | 2.3 KW |
| Heating Element Power | 0.12 KW |
| Total Power | 12.31 KW |
| Machine Size (L x W x H) | 222" x 49" x 61" |
| Net Weight | 5600 LBS |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 12476 - POSTFORMADORA 0110 - EVANS
PARTE: 12476 -
POSTFORMADORA 0110 - EVANS
USADA - BUENAS CONDICIONES
The Model 0110 Postformer boasts a state-of-the-art pneumatic-assisted
heater, accelerating your production while reducing operator fatigue. Customize
your projects with precision using the adjustable leaf, allowing effortless
setting of leaf spacing for build-downs ranging from 1/2″ to 1 1/2″.
Maximize your workspace with this compact wonder, occupying a mere 48
square feet while delivering exceptional ...
AMXmachinery
ARMADORA DE SILLAS - LANCASTER
PARTE: 12384 - ARMADORA
DE SILLAS - LANCASTER
USADA – BUENAS
CONDICIONESMax opening between jaws (front/back) 32"Max opening between jaws (side/side) 26"Max opening between clamping jaws on side clamp assembly
24"(2) horizontal adjustable swivel side clampsPneumatic clamping cylinders with 5" stroke(1) horizontal adjustable side to side clamp Pneumatic
clamping cylinder with 5" strokeManual traverse of end clamping jaws Bottom chair leg support
table
Foot ped...
AMXmachinery
PEGADORA DE SABANAS - FISHER RÜCKLE
PARTE
# 12161 – PEGADORA DE SABANAS - FISHER RÜCKLE
USADA – MUY BUENAS CONDICIONES
Year of manufacture 1993
Opening width mm 2.850
Veneer thickness min mm 0,4
Veneer thickness max mm 2
Strip width min mm 70
Strip width max mm 430
Width of lifting table mm 430
Feedrate max m/min 24
Gluing aggregate Yes
Cross splicing machine Yes
Lift table Yes
Trimming unit Yes
Joint Only edge gluing
Operating status dismantled/ stored
AMXmachinery
SIERRA ESCUADRADORA SCM MINIMAX S315WS
PARTE # AMX-10054 - SIERRA ESCUADRADORA – SCM - MINIMAX S315WSEN MUY BUENAS CONDICIONESLA MAQUINA ESTA COMPLETA Y YA DESARMADA LISTA PARA ENVIO EN SU TARIMA DE MADERAMOTOR: 5 HP, 230V, 60HZDISCO PRINCIPAL: DIAMETRO 12” (315 MM MAX) FLECHA 30 MM, 4200 RPM - INSTALADODISCO INCISOR: DIAMETRO 4-3/4” (120MM), Z 20, FLECHA 20 MM, 9300 RPM - INSTALADOLARGO CARRO: 3200 mm (126”)LARGO AGARRADERA DEL CARRO: 360 mm (14”)LARGO CARRO TOTAL: 3560 mm (140”)MODELO: 2005HECHA EN ITALIAPESO MAQUINA: 5...