Identificador: 196
Abierta
ID de articulo : # 196 se ha agregado a su lista de deseos.
Descripción
PARTE: 2TA-EB-3ESB - ENCHAPADORA DE CANTOS
- Automatic feed station for: Gluing, Front & Rear End Trimming, Top & Bottom Edge Trimming, Top & Bottom Edge Polishing,
- Total enclosure covers with dust hood connector.
- Heavy and rigid construction to ensure necessary accuracy and stability.
- To guarantee straight-line feed of the panel, a double row of rubber rollers is off centered onto top pressure beam and bottom feed track with rubber calibrated pads is running on cylindrical guide.
- The top pressure beam is supported with two reinforced columns are equipped with visible linkages for thickness adjustment.
- The feed of edging material, by strip or coil is automatic and synchronously with panel feed.
- Extension rollers support for wider panels.
- The electric and pneumatic system is incorporated in the built-in control cabinets.
- Side Pressure Unit: Standard with one row of vertical rollers for straight edges.
- Gluing Unit: With the use of melt glue applied on straight Panel for edges banding.
- Double End Trimming Unit: Application for fine trimming front & rear edge by HIGH FREQUENCY saw motor
- Edge Trimming Unit: This top and bottom edge trimming unit is complete by cutter heads with two independent HIGH FREQUENCYmotors
- Polishing Unit: Apply the finest finish surfacing process on top and bottom edge.
| SPECIFICATIONS | EB-3ESB |
| Edging PVC Band Thickness | 0.0015” ~ 0.118” (0.4 ~ 3 mm) |
| Edging Band Width | 0.55” ~ 2” |
| Work Piece Thickness | 0.47” ~1.77” |
| Work Piece Minimum Length | 11” |
| Work Piece Minimum Width | 3.5” |
| Edge Band Feed Motor | 25 W |
| Gluing Motor | 60 W |
| End Trimming Saw Speed | 12000 RPM |
| End Trimming Motor | ½ HP |
| Edge Trimming Cutter Speed | 12000 RPM |
| Edge Trimming Motor | ½ HP x 2 |
| Polish Wheel Speed | 1400 RPM |
| Polish Motor | 1/8 HP X 2 |
| Feed Speed | 0 ~ 23 FPM |
| Feed Motor | ½ HP |
| Heating Element Power | 1250 W |
| Total Power | 4 HP (3 KW) |
| Power | 220V 3PH |
| Air Pressure | 90 PSI |
| Machine Size | 87" x 28" x 48" |
| N.W. | 950 LBS |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 12621 – TRITURADORA – ASTILLADORA – 25 HP – VERTICAL – GENOX
PARTE: 12621 – TRITURADORA – ASTILLADORA – 25 HP – VERTICAL – GENOXUSADA – BUENAS CONDICIONESMODELO: V600MFG. 2021MOTOR: 25 HP, 220V, 3 FASES, 60 HZ
AMXmachinery
PARTE: 2SW-LS4-36-B - BOMBA HIDRAULICA – PARA MESA DE TIJERA – CAP 4,000 LIBRAS
PARTE: 2SW-LS4-36-B - BOMBA HIDRAULICA – PARA MESA DE TIJERA – CAP 4,000 LIBRASNuevas con garantíaHechas en USA
-500x500.jpg)
AMXmachinery
MOLDURADORA – 5 CABEZALES – WEINIG PROFIMAT 26
PARTE: 12106 – MOLDURADORA – 5 CABEZALES – WEINIG PROFIMAT 26Usada – Muy buenas condicionesWeinig Moulder and Grinder packageWorking capacity: 9-1/16” x 4-3/4”Spindles Configuration: B-R-L-T-T-BMotors: Bottom 10 HP, Right / Left 10 HP, Top 15 HP, Top 20 HP and Bottom 10 hp.Spindles: Dia. 1 1/2" with rotation at 6,000 RPM. Digiset readouts for left and top spindles. Readouts on chipbreaker and hold down. Weinig ATS -E for left and top radial positioning.Feed: Variable speed 4 HP with ...
-500x500.jpg)
AMXmachinery
LINEA DE PINTURA CEFLA
PARTE: 12000 - LINEA DE PINTURA - CEFLAEN MUY BUENAS CONDICIONESPara mas informacion contectenosComponents:Cefla Sorbini Infeed conveyor T/S-R-VS (2010) 220V 1.6KWCefla Falcioni Unospray 1300 (2005) 220V 10.5KW Cefla Sorbini Outfeed conveyor (2005) 220V 0.4 KW 510KgPresurized Water Heated Spray Cabin LPS 50-70 (2010) 220V 6.2KW 5m x 7mCefla Sorb...