Identificador: 1930
Abierta
ID de articulo : # 1930 se ha agregado a su lista de deseos.
Descripción
PARTE: 2CA-RM70 - BASTONERA – CAPACIDAD 3/8” - 2-3/8” DIAMETRO
NUEVA CON GARANTIA
- The unit is designed solely for shaping of round poles in wood working factory.
- The 4-stage speed feeding of square workpiece into cutting position by means of feed rollers may continuously push out shaped round poles in full automatic.
- The cutting head has been proven flawless through experience and study of many years.
- The unite cuts out perfectly round rod or stick, such as flag pole, rattan, acrylic molded board, carbon, bakelite, bamboo and wood.
- A hand wheel is provided to adjust simply the feed rollers.
- Wood fragments and dust are cleared off from the unit thoroughly in coherence with spindles revolution.
- Cutting of each type and size of workpiece will be carried out by specific cutter head and rollers for finished products.
- Automatic feeding, one-piece cast iron base.
- High-efficiency industrial TEFC motor for powerful cutting.
Design and specifications are subject to change without prior notice.
| SPECIFICATIONS | ||
| Motor of Main Cutter | ||
| Feed Motor | ||
| Cutter Speed | ||
| Feed Speed | ||
| Total Knife | ||
| Working Size | ||
| N.W. | ||
| G.W. |
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
MOLDURADORA - MACHIMBRADORA - 4 CABEZALES
PARTE: 1N-0800- MOLDURADORA/MACHIMBRADORA - 4 CABEZALES- NUEVA CON GARANTIA- INCLUYE LOS 4 CORTADORES - 1 ARRIBA, 1 ABAJO Y 2 LATERALES- CADA CORTADOR INCLUIDO TIENE 4 ALAS- ANCHO DE LA MESA: 20"- LARGO DE LA MESA: 63"- ANCHO MINIMO: 2"- ANCHO MAXIMO: 6", 7" y 8" A ESCOGER- GRUESO MINIMO: 1/2"- GRUESO MAXIMO: 2"- LARGO MINIMO: 50 CM- 1 CABEZAL HORIZONTAL PARA CEPILLADO- 2 CABEZALES VERTICALES PARA LOS CANTOS- 1 CABEZAL HORIZONTAL DE SALIDA- FLECHAS DE LOS CORTADORES LATERALES SON DE 1" DIAMET...
AMXmachinery
SECANTE DE CHAPA - 2 CAMAS
PARTE: 11723 - SECANTE DE CHAPA - 2 CAMAS
4 - SECANTE EN FASE DE INSTALACION CON 2 CAMAS
MISMAS CARACTERISTICAS DEL ANTERIOR
AMXmachinery
CEPILLO 1 CARA - 250 MM ANCHO - 3 HP - MARUNAKA
PARTE:
3MA-SUPERMECA-S - CEPILLO 1 CARA - 250 MM ANCHO - 3 HP - MARUNAKA
NUEVO CON GARANTIAAble to operate by auto return feedingMax Work width x Height : 250 mm (40º) 165 mm (60º)Max work height: 180mmKnife bias angle: 0 - 60 degree (variable)Feed speed: 54m/min (50 hz)Feed motor : 2.2 Kw, 3 phaseHead elevation motor : 0.1 Kw phaseKnife type: Chanching blade typeFront knife size : 335 x 66 x 8mmAccessories:Changing blades, front and rear roller tables and
standard toolsMachine size: (W...
AMXmachinery
PARTE: 2CA-RM150 - BASTONERA – CAPACIDAD 1” - 5” DIAMETRO
PARTE: 2CA-RM150 - BASTONERA -
CAPACIDAD 1” - 5” DIAMETRO
NUEVA CON GARANTIAThe unit is designed solely for shaping of round poles in wood working factory.The 4-stage speed feeding of square workpiece into cutting position by means of feed rollers may continuously push out shaped round poles in full automatic.The cutting head has been proven flawless through experience and study of many years.The unite cuts out perfectly round rod or stick, such as flag pole, rattan, acrylic molded board...