Identificador: 1919
Abierta
ID de articulo : # 1919 se ha agregado a su lista de deseos.
Descripción
PARTE: 2LI-D - MEDIDOR DE HUMEDAD PARA MADERA – SIN PINS - LIGNOMAT – LIGNO-SCANNER D
Nuevo con garantía
Measuring | 5-60% dependent upon species setting* |
Display | 0.1% resolution for the entire range. |
Species | 71 wood group settings, or simply use specific gravity of the wood, between 0.3 and 1.0 (setting 30-100) |
Gypsum | N/A |
Reference | 0-99 for non-wood building materials |
Calibration | Stable calibration not affected by ambient temperature. Calibration is internally checked and automatically adjusted if necessary. |
Calibration Check | External calibration check block #TS is available to verify the calibration and functions of meter. |
Included | Pouch, one 9V battery, manual and laminated wood group chart. |
Size | Pocket-size 2″ x 5.5″x0.5″, Measuring pad 1 5/8″ x 2 5/8″ |
Weight | 8 ounces (200g), made out of high-impact plastic |
Warranty | All moisture meters have a 2 year warranty. Pins and battery are excluded. |
The measuring depth of a pinless meter is crucial. Moisture readings are too low, when the Scanner is placed on a work piece which is thinner than the measuring depth. Scanners never measure any deeper than the measuring depth.
The entire measuring pad has to be on a flat and smooth surface for accurate readings
*Species Corrections for Ligno-Scanners and Ligno-VersaTec correlate directly to the Specific Gravity. Example: For a specific gravity of 0.57 (0.57g/cm 3 )set species # 57. Specific Gravity for most wood species can be found on the Internet. We also include a Species Chart with recommended settings.
The Ligno-Scanners SDM and the Ligno-VersaTec have calibrations built-in for drywall and concrete and a reference scale for non-wood building materials.
Measuring range: 5-60% dependent upon Species. For hardwoods the Scanners read lower than 5%, for softwoods the Scanners start reading above 5%. Resolution of read-out: 0.1% Less accurate above Fiber Saturation Point at 30%.
Wood temperature correction is not necessary.
1 9-V Battery for 3000 Readings, Battery included
Size: 1/2″H x 2″L x 5″W (for Scanner LD width is 2 7/8″) Weight: 8 ozs
Comes in a Carry Pouch with Belt Loop.
Pago y Devoluciones
- Forma de pago
- PayPal
Envio
- Ubicación de elemento de riesgo
- 31627, Chihuahua, México
- Enviar a
- México
- Retiros
- no recoger
- Devoluciones aceptadas
- No
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 2RT-010 - APILADOR DE TARIMAS - DESDE 30X30 PULG HASTA 50X48 PULG
PARTE: 2RT-010 -
APILADOR DE TARIMAS - DESDE 30X30 PULG HASTA 50X48 PULGNuevo con garantiaDesde 30" x 30"Hasta 50” largo Barrote x 48” anchoMaquina para tarimas de 3 y 4 barrotesMedidas especiales disponiblesCompletamente neumatica, no requiere electricidadLista para trabajarMaquinas practicamente libres de mantenimientoConstruidas de uso rudo para maxima produccion todos los diasHay mas de 240 maquinas en operacion hasta este diaMesa de rodillos patentadaEl operador no tiene que levantar ...
AMXmachinery
PRENSA FRIA – CAPACIDAD 1100 X 1100 MM X 2 – 25 TON X 2
PARTE: 3UD-CP48X25T-2 – PRENSA FRIA – CAPACIDAD 1100 X 1100 MM X 2 – 25 TON
X 2
Nueva con
garantía
MODELO
3UD-CP48X25T-2
WORKING TABLE
SIZE
1100 X 1100 MM X 2
MAXIMUM PRESSURE WORKIG TABLE
25 TON X 2
MAXIMUM
OPEN DISTANCE PRESS PLATE
1000/1250
MM
OIL
CYLINDER
90 MM
X 2 PCS
HYDRAULIC
MOTOR POWER
4 KW
...
-500x500.jpeg)
AMXmachinery
PART: 12308 - ALPINE AUGSBURG MILL - 100 HP
PART: 12308 - ALPINE AUGSBURG MILL - 100 HP
USED - GOOD CONDITIONS
NO MOTORS INCLUDED, ONLY THE MILLSVideo1: https://vimeo.com/774527761
AMXmachinery
CABINA SAND BLASTER
PARTE: 1SIL-DC-SBC - CABINA PARA SAND BLASTER ARENADOPARTE: 1HA-0060 - CABINA PARA SAND BLASTER ARENADO - MPNueva con garantiaCapacidad de espacio interno: 300mm alto x 500 mm ancho x 800mm largo;Ventana para Inspeccion: 57mm x 260mm;Dimensiones: 1400mm alto x 870mm largo x 570mm ancho;Incluye: Pistora aspersora, 4 boquillas de ceramica, lampara interna y 1 par de guantes;Requiere: Aire comprimido y energia electrica 110V 60hz;Se recomienda utilizar compresor con tanque minimo de 100 lts y 3 HP...